The black Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and LEMO 4-pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS-170, TS-170p, VHF TS-190, and TSP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work for the Tilta Nucleus-M motor?

A: We can only recommend the Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable as the correct power cable for the Tilta Nucleus-M motor. Tilta Nucleus-M D-Tap to 7-Pin Motor Power Cable BH #TIWLCTPTAP7P

Q: 2. Does this work with tenticals?

A: Yes, the RODELink Lav Omnidirectional Lavalier Microphone is compatible for use with the Tentacle Sync TRACK E Pocket Audio Recorder.

Q: 3. Will this work with the SmallHD Cine 5?

A: Yes, the Kondor Blue Coiled D-Tap to LEMO-Type 2-Pin 0B Male Power Cable for Z CAM, SmallHD & Teradek (Black) can be used with the SmallHD CINE 5 Touchscreen On-Camera Monitor.

Q: 4. Does this work with Rode Wireless Pro?

A: Yes, the RODE RODELink Lav Omnidirectional Lavalier Microphone for RODELink Systems, is fully compatible with the RODE Wireless PRO 2-Person Clip-On Wireless Microphone System/Recorder with Lavaliers (2.4 GHz).

Q: 5. Does this work if it's plugged directly into the Atomos Ninja V?

A: No, the RODELink Lav uses a locking 3.5mm connector which attaches to a threaded 3.5mm input jack and the Atomos Ninja V has a standard (non-locking) 3.5mm mic input. Rode's Lavalier GO (B&H# ROLAVGO) is a similar mic with a non-locking 3.5mm connector that is compatible for use with the Ninja V. For additional options you may want to consider the Microphone Madness MM-ML (B&H# MIM) or MM-LAPEL-1 (B&H # MILAPEL1), Polsen PL-4 (B&H # POPL4) or PL-5 (B&H# POPL5) which are all omnidirectional lavalier mics that can be used with the Ninja V. .

Q: 6. Will this work with the Zoom H1n?

A: Yes

Q: 7. How does this mic differ from the one that is included in the RodeLink Filmmaker kit? Is it better?

A: According to Rode, the only difference between the lavalier mic that is included in the RodeLink Filmmaker Kit and the separate RodeLink Lavalier mic is the locking collar. On the RodeLink Lavalier, the locking collar is removable so the mic can be used with devices that have either a locking or non-locking 3.5mm audio input. The locking collar on the mic included in the kit is not removable so the mic can only be used with devices that use a locking input. The mic capsule is identical on both mics.

Q: 8. Will this work with the Zoom f1 field recorder?

A: Yes, the RODE RODELINK Lav Omnidirectional Lavalier Microphone for RODELink Systems will work with the Zoom F1-LP 2-Input/2-Track Portable Field Recorder.

Q: 9. Will this work on the SmallRig 3252 in powering the DJI RS3 Pro?

A: The DigitalFoto Solution Limited Coiled D-Tap to Right-Angle LEMO 0B-Type Male 2-Pin Power Cable for Vaxis Wireless Transmitter and Tilta Power Base (1.6 to 4.9') will not power the DJI RS3 PRO. The DJI RS3 PRO is powered by the handle attached to the device and is charged by USB-C.

Q: 10. could it be used on a Juicebox battery 2 pin lemo going out to a Silencer Pro control box with JST input?

A: Hi Peta - thanks for asking. It may be possible, but we have no info on using it with those items and in reverse order (this is to draw power from jst and supply it to 2-pin) so we can't recommend it.