The tan Countryman E6i Directional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Sony Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. is it compatible with saramonic blink 500 pro?

A: Yes you can use the Saramonic SR-UM10-C35XLR with the Saramonic Blink 500 Pro receiver.

Q: 2. How long is the Locking 3.5mm TRS to XLR-Male cable?

A: The cable is 16" long, minus the connectors. End to end, connector to connector it is approximately 21.25".

Q: 3. Hi, will this work with the Sony Utx-b40 transmitter? I'm looking to get a line out from a sound desk wirelessly. Cheers, Colm

A: Yes, the Sony EC-1.5BX 3.5mm Locking Mini-Plug to Female XLR Cable (4.9') is fully compatible with the Sony UTX-B40 Wireless Bodypack Transmitter .

Q: 4. can I use this with the URX-P03 model?

A: This cable will connect to the Sony URX-P03 receiver, or any Sony receiver with a 3.5mm locking connector.

Q: 5. Will this work with the Bolt Cyclone x pp-600 (B&H # BOPP600 MFR # PP-600) ?

A: In order to best assist you, please email us with the model of flash you plan to use with this battery pack and cable at photo@a href= http://bhphoto.com. target= _blank bhphoto.com./a Thank you.

Q: 6. What is the length of the cable?

A: The length of the Sony EC-0.46BX 3-pole Locking Mini-Plug to XLR Cable is 0.46 meters or 1.5 feet.

Q: 7. would this work to connect a mic to a Sennheiser AVX Transmitter?

A: This SONY cable is wired differently than those for Sennheiser products. It will not work. Use this one: Sennheiser CL-100 1/8"-Male Mini Jack to XLR-Male Connector Cable for Sennheiser EK100 Receiver B&H # SECL100: https://bhpho.to/38PeAST

Q: 8. Can i use this with the receiver of Comica Audio BoomX-D D1?

A: No, the Comica Audio Locking 3.5mm TRS Male to Lightning Adapter Cable for Wireless Receiver to iPhone has a 3.5mm locking connector and the output from the receiver from the Comica Audio BoomX-D D1 Ultracompact Digital Wireless Microphone System for Mirrorless/DSLR Cameras has a non-locking 3.5mm TRS connection so the locking connector may not latch properly to the receiver. As a better option, you can use the Saramonic SR-C2000 3.5mm TRS Male to Lightning Adapter Cable for Audio to iPhone (B&H # SASRC2000) or use the 3.5mm TRS to 3.5mm TRS coiled cable that is included with the BoomX-D D1 system and attach the Movo Photo IMA-2 Female 3.5mm TRS to Lightning Microphone Adapter Cable - 5.5" (B&H # MOIMA2).

Q: 9. Hi, Can use in the same time 2 x Rode Wireless Go (for both mono conectors) to record with Zoom H1 or H5 (for stereo conector)? I will get in my audio track from recorder both source (sound form both Rode Wireless go)? Thanks

A: We have not tested this arrangement, but it should work based on the cable's description and your desired deployment.

Q: 10. Will this work with the Sennheiser EW 500 G4 wireless receiver?

A: Yes, the Sony EC-0.46BX will work with the Sennheiser EK500 wireless receiver for the ew 500 G4 system. If you want to get the same Sennheiser cable that comes with the wireless system, it's the Sennheiser CL-500 (B&H # SECL500) which is a balanced cable. As another option, you can use the Kopul Deluxe Wireless Receiver Output Cable - 18" (B&H # KOROCLM2) which is also a balanced cable.