Pro Co Sound brings multi-tasking to their line of cables with Siamese Twin Cables. They are a unique combination of balanced audio and AC electrical power carried through the same cable assembly with individual shielded lines that prevent EMI/RFI from disturbing the audio signal. Its ingenious construction is extremely useful for providing power to self-powered, full-range, and bi-amplified loudspeaker systems from manufacturers like Turbosound, JBL, EON, EAW, Meyer, Mackie and others.

This design combination of balanced audio and AC electrical power flowing from a set of components aids in reducing cable snarls. Each cable has a fanout of connectors that provide enough reach for the lines to connect to the power and audio ports which may or may not be near each other. The cable ends are color-coded for easy identification and the cable body has a rugged jacket that protects the individual lines inside.

Multi-Tasking Cable    Balanced Audio and AC Electrical Power    Color-Coded Cable Ends    Each Cable Has a Fanout of Connectors

Combined balanced audio and AC power in a single, easy-to-handle cable assembly

Rugged, and flexible combination-use cable provides fast set-ups and tear-downs without adding "clutter"

Single-shielded AC and double-shielded audio line completely prevent all hum and buzz problems under 100 kHz

Related Questions and Answers

Q: 1. Is this item returnable?

A: This is a returnable item under the B&H policy:a href= http://www.bhphotovideo.com/find/HelpCenter/ReturnExchange.jsp target= _blank http://www.bhphotovideo.com/find/HelpCenter/ReturnExchange.jsp/a

Q: 2. Is there another version of this cable that has a true stereo RTN?

A: The RTN L+R pins are summed to a single pin as a limitation of the 8pins available in these NeutriCon connectors. To give the Timecode's ground isolation from the XLR audio (to avoid that pesky TC Bleed), they are out of pins. The cable itself has enough wires to accommodate a true stereo return... it crossed my mind to replace the connectors with XLR-10pin, but those are not as easily "breakaway-able". So either way, it's a trade-off.

Q: 3. Will it work with Sound Devices 302 as well? I Know theres one Breakaway cable intended for FP33 and SD 302, but I would like to know if this one has same capabilities as the mentioned and also has timecode in it.

A: It will work as an audio output tethered to camera via XLR. But the timecode side of things will not be usable as the 302 does not have a timecode function. The return into the 302 should work, but I've never personally tested it.

Q: 4. Do you sell and extension cable?

A: If you are extending the length of the XLR connections on the Remote Audio CABETASD633 ENG Breakaway Cable, you can use two standard XLR cables such as the Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable - Black, 25' (B&H # KOM3025), in the length you prefer. If you need to extend the length of the 3.5mm connections, you can use a standard aux extension cable such as the Pearstone 3.5mm Stereo Male to Female Extension Cable - Black, 25' (B&H # PEMMSB125B), in the desired length.

Q: 5. It seems that this device Input is XLR, does it means that it is a mono input only? no stereo input?

A: This device is mono input only.

Q: 6. How many 4 x 6 prints can I expect to print before replacing the ink cartridge? What is the average yield per ink cartridge?

A: I purhcased these for a friends printer..........and he rarely prints photos from it (maybe 4-5 per monht. But he did print almost a ream of paper per month. Under those circumstances, since 2014, we have never replaced the color cartridge and the black one has been replaced about 3 time per year.Sorry I can't be of more help but my printer where I do a lot of photoprinting uses different cartridges.

Q: 7. Is there an extension cable available for this?

A: There is only a 50' time code cable.

Q: 8. Can we use the Focus pro with non hard hard-stop lens ?

A: No, DJI recommends only using lenses with hard stops like Cinema Lenses when using the DJI Focus Pro All-In-One Combo.

Q: 9. Is the RTN on this cable really mono? The Sound Devices 302 and 633 both expect stereo return.

A: The return on this cable is mono, using a balanced (stereo) 3.5mm connector which is compatible with the Sound Devices units.

Q: 10. Will this handle work with the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals BH #TITGAARG?

A: The DJI Focus Pro Grip of the DJI Focus Pro All-In-One Combo can mount onto the NATO mounting points of the Tilta Advanced Ring Grip for DJI RS 3 Pro and RS 2 Gimbals, but the grip is designed to be connected directly to the focus motor and may not be a functional setup.