The cocoa Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. what lav mic can i add to this.. to plug into the receiver? can i use the azden ex-503L?

A: Hi Jack, my name is Dave and I work for Azden. The PRO-XD kit does come with a lavalier microphone, in case you werent clear on that. The model of that mic is the EX-503XD. This model mic is somewhat unique as it has a TRRS (tip=ring-ring-sleeve) mini-jack connector. You can use a different microphone with the PRO-XD but it will need to have this TRRS connector. Conveniently, the PRO-XD kit includes a TS to TRRS mini-jack adapter cable, which can be used to convert any ordinary lavalier mic (with a TS connection) into one that works with the PRO-XD.Keep in mind, when using other microphones, that they will likely have different sensitivities and output levels. The output of the EX-503XD is designed to work well with the PRO-XD.

Q: 2. would this hdmi cable be ideal for connecting an LG C2 4k tv to a ps5? is the cable hdmi 2.1?

A: Yes the Belkin Ultra High-Speed HDMI Cable with Ethernet (6.6') would be ideal for connecting an LG C2 4k tv to a ps5 and yes it is an HDMI 2.1 cable.

Q: 3. Is Azden SMX-15 Powered Shotgun Video Microphone compatible with the Canon EOS R5c??

A: Yes, the Azden SMX-15 Powered Shotgun Video Microphone is compatible for use with and connection to the 1/8" / 3.5 mm TRS Stereo Mic/Line input on the Canon EOS R5 C Mirrorless Cinema Camera.

Q: 4. can I monitor what the mic is picking up through headphones?

A: Yes, headphones can be used to monitor the audio that the mic is picking up. Since the mic does not have its own built-in headphone jack, you will need to connect headphones to the headphone jack on your camera or recorder (or any other device you connect the mic to) in order to monitor the audio.

Q: 5. can you run 2 mics off of this single receiver?

A: The Azden WR-PRO is only able to communicate with a single transmitter simultaneously. If you are interested in running 2 mics simultaneously, Azden offers the WR32-Pro dual receiver. Available as a set with 2 mics, 2 transmitters, and receiver. a href= http://bhpho.to/1zlor93 target= _blank http://bhpho.to/1zlor93/a

Q: 6. This says it's IOS compatible. What IOS system must be running? Will it work with a iPhone6 plus? Also, if I am shooting video with my mobile device, can I use the mic set up for the audio on the video while shooting the video at the same time I have the audio rig set up to that same device ? I'm trying to shoot video with my device but get better quality audio then my iPhone has to offer.

A: I wasn't able to find where it said iOS compatible on this page, but maybe I'm missing it. If it does say that, it's not exactly correct. But if the question is, Can you connect it to a smartphone to record audio while shooting video, the answer is yes. You will need to get our HX-Mi adapter cable or some equivalent so you can plug into the phone's headphone jack and connect to the microphone input. This will work with just about any android or iOS mobile device (including iPhone 6 Plus) as long as it has a TRRS headphone input (which most phones do). Bear in mind this product is just a wireless receiver. We sell this in complete kits as well. You'll want to check out the WLX-PRO+i and WMS-PRO+i which are full systems that come with the required adapter cable for mobile devices.

Q: 7. Do the Azden Pro XD mount on the camera, or you have to buy a mount?

A: They mount right onto my dslr camera

Q: 8. How is the built quality?

A: Good

Q: 9. how do I mount a WR-Pro wireless receiver on a Sony HDR-CX430V video camera?

A: Unfortunately that camera has a hot shoe on it. So you have nothing on the camera to attach a cold shoe to. But you can circumvent this minor problem with a Vello CB-510 Dual Shoe Bracket. This bracket will screw into the bottom of the camera where you would normally attach the camera to a tripod. Instead you will screw the Vello bracket onto the camera. This device will now give you 2 cold shoe mounts that are part of the bracket and a rubber coated handle that you can now use to hold onto your camera. The Azden receiver should have a shoe that came with it that attaches to the back of the receiver. All you have to do is slide the shoe mount on the receiver onto one of the shoes on the Vello bracket. Then plug the output of the receiver 3.5mm plug into the camera. Here is the B&H part number for the Vello bracket. B&H# VECB510

Q: 10. I plan to use it with Sony HDR CX900 handycam which has a hot shoe. Will I need a shoe extension? What is the range of the Pro-XD? Is there a better mic to purchased separately, seems the only criticism is of the mic.

A: I could never get my system to work at all. It's sitting on the shelf waiting to be returned