The black Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and cH-style 4-pin Connector for Audio Technica Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does is connect to a bluetooth speaker?

A: This particular LP60 does not support Bluetooth. it will only be able to connect to a speaker with an audio cable. The LP60 I provided below supports Bluetooth to which it will wirelessly connect with any Bluetooth speaker (or BT headphones). https://www.bhphotovideo.com/c/product/1453366-REG/audio_technica_consumer_at_lp60xbt_bk_fully_automatic_belt_drive_stereo.html?sts=pi&pim=Y

Q: 2. I thought this turntable was fully automatic start to finish?

A: Fully automatic belt-drive operation with 33 1/3 and 45 rpm speeds.

Q: 3. Do I need to buy a needle?

A: No, this turntable comes with the AT-HS6 headshell and AT-VM95E cartridge, so you will be ready to go. Replacement stylus are readily available.

Q: 4. What means full automatic? It is that the arm start moving to the disc and return back after end the long playing?

A: Yes, as others have said with the push of a button you can start playing and it will return once it reaches the end of a record.

Q: 5. does it have a strobe indicator for speed ?

A: No. There is no strobe.

Q: 6. Will this work with W20 and W40?

A: No as these sport an MMCX Connector. Below is a link to some cable options that are compatible. https://www.bhphotovideo.com/c/search?sts=ma&ci=2534&cp=12154%2b31442%2b2534&N=N&Ntt=westone%20mmcx%20cable&

Q: 7. Is it compatible with Tascam DR-40? If "yes", what adapter I have to use?

A: Yes, you can use the MM-ML with the Tascam DR-40. Use a Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H #ROVXLRP) to convert the mic's 3.5mm plug to XLR as well as to convert 48V phantom power from the recorder into low voltage plug-in power suitable for the microphone.

Q: 8. Can you use this with the Sony PXW FS7 wireless base on the camera,,,,,or do you have to run an XLR to the Camera?

A: The Audio Technica System 10 receiver requires a cable connection to the Sony PXW-FS7. Not compatible with the Sony Multi Interface shoe.

Q: 9. How do you charge it?

A: Runs on AC or AA Batteries Alkaline or Niamh full specs in in the manual click on "Overview" on the web page and go page 32 on the manual on the right hand side.

Q: 10. WILL THE Audio-Technica ATR4650 Omnidirectional Condenser Computer Microphone WORK ON PERSONAL DIGITAL VOICE RECORDER?

A: Yes, provided the recorder has a mic input.