The black Countryman E6 Directional Earset Mic, Medium Gain with Detachable 1mm Cable and LEMO 3-Pin Connector for WisyCom Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this cable power a Teradek bolt 300 wireless tx or rx?

A: Yes, the DigitalFoto Solution Limited D-Tap to Right-Angle 2-Pin Coiled Power Cable for Vaxis, CVW & Teradek (1.6' BH #DIZZ08) will allow you to send power to a Bolt 300 Transmitter or Receiver.

Q: 2. Will the Anton Bauer Titon Base allow my R5c to shoot 8K raw 60fps?

A: No, the external power source needs to be USB with PD.

Q: 3. Is this cable is compatible with the new Nikon D750 DSLR Camera ?Please let me know, Gracias.

A: Yes. This cable is compatible with the Nikon D750 DSLR Camera.

Q: 4. how many hours can this give?

A: Runtime for the Anton Bauer Titon Base Kit for Blackmagic Pocket Cinema Camera 6K/4K Cameras is 4 to 6 hours (dependent upon load) with the Pocket 6K and 4K.

Q: 5. Will the Anton Bauer Titon Base (14V DC output) work for bmpcc HD (original) since it accepts only 12V input. Thanks

A: Yes, you should get the kit that includes the power cables. Anton Bauer Titon Base Kit for Blackmagic Design Pocket 4K/6K with 2-Pin Connector and LP-E6 Dummy Battery https://www.bhphotovideo.com/c/product/1596781-REG/anton_bauer_8275_0130_titon_base_kit_for.html

Q: 6. When using an FX-3 is there any “wobble” with the Anton Bauer plate?

A: The baseplate on the Anton/Bauer 68Wh Titon Base Battery can be unstable at times.

Q: 7. What is the voltage on the AB battery? The title states 12V but the specs state 14.4V

A: It will do up to 14.4V, but it works at 12V.

Q: 8. Is the quick release made of plastic or metal?

A: The quick release on this Anton Bauer 68Wh Titon Base Battery, would be made of plastic.

Q: 9. Yes, the battery turn off itself when is not on use but... why after not use I still seeing the percentage that indicates that is still ON?

A: According to Anton Bauer for the Anton Bauer 68Wh Titon Base Battery: "When the battery is sitting idle (no load is applied) the LCD will show remaining capacity as percentage of full.", "When the battery is powering an item (a load is applied), the LCD will display remaining run-time in Hours/Minutes." https://bit.ly/3ovafOR

Q: 10. Will this work on C70?

A: This would work on the Canon C70