The black Countryman E6 Directional Earset Mic, Medium Gain with Detachable 2mm Cable and 2.5mm Locking Connector for Comtek Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 2.5mm locking connector for direct connection to Comtek M-216 and M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What type of protection does this device provide to assure that my camera will not be damaged, i.e output voltage regulation, short circuit protection, overvoltage protection?

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable (B&H# ZIZRUCDB04) is designed to produce the appropriate electrical power for cameras using Canon LP-E6 series batteries (e.g. LP-E6, LP-E6N, and LP-E6NH) based upon a standard USB Power Delivery (PD) source. Canon mirrorless cameras that accept PD-compliant power sources typically work well when that source is 45W or more. PD technology determines the appropriate power requirements and then electricity is delivered at the most beneficial voltage and amperage from the power source (e.g. a PD-capable battery pack, a PD-rated AC adapter, etc.) Thus the process by which the appropriate determination is made depends not just on the cable but also on the PD-compliant source. The specifications of the process and configuration of the regulation and sensing techniques are standardized. However, the process and any regulation that may occur after such a transformation occurs is not disclosed by the manufacturer.

Q: 2. what is the difference between extended low end and standard EQ?

A: The Comtek PR-75P AutoSmart-Tuning Wireless Monitor Receiver with Extended Low End boosts the low-end frequency response of the device and is more ideal for film and TV applications where more precise monitoring is required. The "standard EQ" version of the Comtek PR-75a AutoSmart-Tuning Wireless Monitor Receiver enhances speech intelligibility and is designed for tour guide and assisted listening applications.

Q: 3. Will this work with TV? Will it work with the plugged-in microphone at church? (It works fine with the microphone in the Chapel.)

A: The Comtek PR-75a AutoSmart-Tuning receiver is designed to integrate with non-compand transmitters tuned to 72-76 MHz. Both a TV and an audio system in a church would need to have a transmitter like the M-175 or BST-75 in order for the PR-75a receiver to work.

Q: 4. Will this work with a BlackMagic Pocket 4K?

A: Yes, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable will work with the Blackmagic Pocket Cinema Camera 4K.

Q: 5. What is the typical range with clear line of sight?

A: The Comtek PR-75a AutoSmart-Tuning Wireless Monitor Receiver (72 to 76 MHz) will give you a range of up to around 100-feet in the most ideal conditions.

Q: 6. Will this work with any battery pack with a 45w or more PD port on a R5? Or does it have to be a ZILR battery or Anker?

A: The ZILR USB-C to Canon LP-E6 Dummy Battery Cable could be used with any charger or battery that supports USB-C PD power output.

Q: 7. Does this receiver work with the older Comtek BST-25 transmitters?

A: No it is not compatible. The PR-216 is the compatible receiver for the BST-25 The PR-216 and the BST-25 are available in two frequency bands, 76-88 MHz and 216-217 MHz. In order for the PR-216 to work with the BST-25, they both need to be on the same frequency. Here are the item numbers: #COPR216 (216-217 MHz) # COPR216TV56 (76-88 MHz)

Q: 8. Is this unit blue tooth compatible?

A: This receiver operates on the 72 to 76 MHz radio frequencies. It is not a Bluetooth device.

Q: 9. Any info as to whether this will mitigate overheating issues while filming 4K on a R6?

A: Powering through an external battery is certainly a method to help mitigate heat build up in the battery slot on the Canon EOS R6 Mirrorless Camera. The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is one approach to take.

Q: 10. Will the LP-E6 version will work with Canon 5DII cameras?

A: Yes, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is compatible with the Canon 5D Mark II.