You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6i Omnidirectional Earset Mic, Standard Gain With Detachable 2mm Cable And Ta4f Connector For Hme Wireless Transmitters (cocoa)

Countryman E6i Omnidirectional Earset Mic, Standard Gain With Detachable 2mm Cable And Ta4f Connector For Hme Wireless Transmitters (cocoa)
  • Product Code: ga76215
  • Availability: In Stock

$1,649.85 $2,243.80

The cocoa Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and TA4F Connector for HME Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to HME TX550 and TX822 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits HME Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersHME: TX550, TX822
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB (A-Weighted)
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersHME: TX550, TX822
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB (A-Weighted)
Sensitivity7.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.079" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorCocoa
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the DJI Transmission High-Gain Antennas work on the NEW DJI SDR Transmission? or does it need them?

A: The DJI SDR Transmission Combo antennas are not removable or replaceable.

Q: 2. Will this work with the 150M receiver as well?

A: Yes, this is compatible with the Ghost Eye 150M and 400M transmitter and receiver units.

Q: 3. I'd like to know how long is the cable?

A: Cable measures 1 meter/39 inches not including connector.

Q: 4. I have a problem. I'm trying to pair 2 k-speak one as a master and the second as a slave but it doesn't work. how can I fix ?

A: Kramer K-Speak USB & Bluetooth Omnidirectional Wireless Speakerphone, BH # KRKSPEAK, will connect via a 1/8" (3.5mm) mini cable to one additional K-Speak device.

Q: 5. can i use this mic on any receptor that fits the mini xlr cable? for example the Shure FP G5.

A: The Shure FP series transmitters feature a 4 pin connection for microphones not compatible with this mic.

Q: 6. Has anyone used these with the Tascam DR-40?

A: The Movo Photo LV4-O2 Omnidirectional Lavalier Microphone with XLR Connector is compatible for use with the Tascam DR-40 Portable Audio Recorder. The recorder can supply the 48V of phantom power that the mic requires.

Q: 7. Is is work in Rode wireless go? Thanks

A: Yes

Q: 8. Is there a version for the 600M, or will this work despite saying its for 150M and 400M?

A: My 150mp power cable also worked on the 600mp this weekend. So I guess yes

Q: 9. This says via its 2-pin LEMO connector yet I see my receiver has 4 pins. I own the 400M unit. Am I missing something or the 2 pins will still work?

A: I have the 150m and the unit works great. I only see two pins on the power supply and two on my receiver. The pics I see on line of the 400m only show two pins and the manufacturer says it works with the 400m. Perhaps the unit you have is a different model or year than the pics I see on line, but I cannot find a 4 pin unit. Hope that helps. If you list a link with the pic of the 4 pin I will compare it to what I have and get back to you.

Q: 10. How do these antennas connect to the controllers?

A: The antenna of the DJI Transmission High-Gain Antenna Set (4-Pack) screw onto the transmitter view the sliver receivers at the bottom of each antenna.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Zeiss 62mm Carl Zeiss T* Uv Filter

$234.00 $348.66

Fsr Ips-a610s-wht Ips Audio Insert (white)

$113.85 $160.53

Lensband Lens Band Mini (light Blue)

$14.97 $18.86

Leica C-lux Leather Vintage Case (brown)

$735.00 $999.60

Arri Pro Cine Set For Canon C300 Mk Ii

$6,810.00 $9,602.10