The cocoa Countryman E6 Directional Earset Mic, Medium Gain with Detachable 1mm Cable and TA4F Connector for Shure Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Shure AD1, ADX1, AXT100TA4F, GLXD1, PGXD1, QLXD1, and ULXD1 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Shure Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the overall life of the battery before it stops holding a charge?

A: Shure hasn't provided details on the 903, however, below is what Shure says about the 900 series: Shure Contact: Toll Free Phone (U.S. only): 1-800-516-2525 An accurate estimate is elusive as it depends upon multiple variables, such as storage temperature, storage capacity, actual usage, etc. Shure estimates that a single SB900 may have a maximum of up to 500 pro-rated cycles. One full cycle is the complete discharge of the SB900, followed by complete charge to "full." As an example: the SB900 has a "expected battery life cycle" of about 12 hours. If the SB900 is used for 4 hours, then charged charged to "full" after each 4 hour use, it would take 3 usages to equal a 1 full cycle. "4 hours" times "3 uses" = 12. A Shure customer reports using the SB900 for 170 hours of operation and the battery indicates a health rating of 97%.

Q: 2. Hi, will it work with Sony UTX-M03 microphones?

A: Yes, this capsule would be compatible with the Sony UTX-M03.

Q: 3. Is this a balanced cable?

A: Yes, the Shure C129 Replacement Cable is a balanced cable.

Q: 4. Is it compatible in slx2 wireless transmitter?

A: Yes, the Shure RPW112 Dynamic Replacement Element for Shure SM58 Microphone Transmitters is compatible with SLX transmitters.

Q: 5. Is there a 6 foot version of this cable available?

A: Unfortunately, the Shure C122 replacement cable is available only in a 4 foot length.

Q: 6. Can I use this capsule with Sony UTX-M03??

A: Yes. I have the same unit and it works flawlessly

Q: 7. CAN THESE BE USED WITH THE OLDER GLXD RECEIVERS since it's both 2.4 and 5.8 GHz? thanks!

A: Yes, the Shure PA805DB-RSMA Dual-Band Passive Directional Antenna can be used for the older Shure GLX-D systems when operating on the 2.4 GHz band.

Q: 8. What adapter or cable can I use to connect this to a regular 3 pin XLR cable? Thanks

A: This PGA98H-TQG model is wired for connection to a Shure wireless transmitter. Although there is an adapter available, for XLR connection with phantom power, it will usually not be the most cost effective option: (https://www.bhphotovideo.com/c/product/619325-REG/Voice_Technologies_VT0137_VT1126_48V_Phantom_Power.html). Instead, I would recommend purchasing the version of this mic that is already made for a hardwired XLR connection. Our part number for it is SHPGA98HXLR and I am linking it below: https://www.bhphotovideo.com/c/product/1128561-REG/shure_pga98h_xlr_pga_98h_clip_on_cardioid.html

Q: 9. will this fit a sony condenser mic?

A: It might fit your SONY mic if its dimensions are similar to the Shure VP89M Modular Shotgun Microphone B&H # SHVP89M

Q: 10. This network port can connect this microphone in Dante protocol?

A: The Ethernet port on the Shure SLXD4 Receiver can be connected to a network switch which can then be connected to a Dante network. However, the Shure ULXD4D Dual-Channel Digital Wireless Receiver and ULXD4Q Quad-Channel Digital Wireless Receiver both feature a Dante dual-port network interface for digital networking capability.