The cocoa Countryman E6 Directional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with any battery pack with a 45w or more PD port on a R5? Or does it have to be a ZILR battery or Anker?

A: The ZILR USB-C to Canon LP-E6 Dummy Battery Cable could be used with any charger or battery that supports USB-C PD power output.

Q: 2. Will it work with newest Canon EOS R50?

A: No, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is incompatible with the Canon EOS R50 Mirrorless Camera (Black) since the camera accepts the Canon LP-E17 Lithium-Ion Battery Pack and not the Canon LP-E6NH Lithium-Ion Battery (7.2V, 2130mAh) style battery. Consider the Bescor LP-E17 Dummy Battery with USB Type-C Connector Kit. See the link below: https://bhpho.to/3xSqytB

Q: 3. Will this device work with any charger or battery source that supports the USB-C power delivery specification? Such as an Anker Power Port III charger or an Anker Power Core III power bank.

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is designed to work with Zilr batteries https://bhpho.to/3mLbyby However the Anker Power Core III Power Bank ( battery) would also be supported.

Q: 4. what kind of power bank do i need to power bmpcc 4k and 6k?

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable requires a USB-C power source like https://bhpho.to/3oz0IqC

Q: 5. Does this receiver work with the older Comtek BST-25 transmitters?

A: No it is not compatible. The PR-216 is the compatible receiver for the BST-25 The PR-216 and the BST-25 are available in two frequency bands, 76-88 MHz and 216-217 MHz. In order for the PR-216 to work with the BST-25, they both need to be on the same frequency. Here are the item numbers: #COPR216 (216-217 MHz) # COPR216TV56 (76-88 MHz)

Q: 6. Will the LP-E6 version will work with Canon 5DII cameras?

A: Yes, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is compatible with the Canon 5D Mark II.

Q: 7. Can this fully power a Canon R5C when filming in 8k/60fps?

A: The IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable (30") (B&H# INPTLPD) may be used to replace the functionality of an LP-E6, LP-E6N, or LP-E6NH battery. It is regulated to provide the requisite 7.2VDC at up to 2A. That is sufficient to equal the functionality of that battery. Users of the Canon EOS R5 C Mirrorless Cinema Camera (B&H # CAER5C) should keep in mind that it will not provide the higher voltage and wattage of the Canon DR-E6C DC Coupler for EOS R5 C (B&H# CADRE6C) that is required for full electronic lens control at frame rates above 30p in 8K, above 30p in 5.9K, or above 60p in 2.9K modes.

Q: 8. Will this work with TV? Will it work with the plugged-in microphone at church? (It works fine with the microphone in the Chapel.)

A: The Comtek PR-75a AutoSmart-Tuning receiver is designed to integrate with non-compand transmitters tuned to 72-76 MHz. Both a TV and an audio system in a church would need to have a transmitter like the M-175 or BST-75 in order for the PR-75a receiver to work.

Q: 9. does the battery door close so the camera will turn on?

A: It would depend on your camera model; however there are many camera models that are built so that the cable of the ZILR USB-C to Canon LP-E6 Dummy Battery Cable would be able to fit with the battery door closed. I would recommend checking the battery door of your chosen camera to verify if there is a channel for dummy battery cables built in.

Q: 10. These posts are old. Is it compatible with OS 12.6.3?

A: Unfortunately, according to the manufacturer's website the Evoluent VerticalMouse D is not compatible with Mac OS 10.5 and newer.