Capture smooth, steady footage with a variety of cameras up to 11 lb with the HD-5000 Video Stabilizer from FLYCAM. Featuring a three-axis gimbal and foam handgrip, this stabilizer makes it easy to capture professional-looking handheld footage, and it can easily be used for panning, tilting, booming, or running. The stabilizer is made of lightweight aluminum and weighs only 3 lb.

The HD-5000 stabilizer has a dynamic camera balance platform that allows balancing the camera on its X and Y axes, and it features a toolless 21 to 29" telescoping center post for balancing camera rigs up to 11 lb. The included quick release plate installs on the top plate and has 1/4"-20 and 3/8"-16 screws to mount a variety of cameras.

Also included are sixteen counterweights that stack onto the 11.5 to 17.2" adjustable baseplate to ensure a perfect balance. A table clamp provides a mounting point for the gimbal for balancing and for storing the balanced, assembled gimbal when not in use.

3-Axis Stabilizer, 11 lb Payload    28-60" Body Vest & Shock-Absorbing Arm    21-32" Center Post Height Adjustment    16 Counterweight Plates

Aluminum camera stabilizer with 11 lb load capacity

X- and Y-axis adjustments on camera platform

Sixteen counterweights that stack onto the 11.5 to 17.2" adjustable baseplate for balancing

Telescoping two-section center post from 21 to 25"

Quick release camera plate with 1/4"-20 and 3/8"-16 camera mounting screws

Table clamp for balancing your camera on the gimbal and storing when not in use

Related Questions and Answers

Q: 1. would this work for shooting still images? My wrists and arms get very tired during shoots and I am wondering is this could be a solution.

A: We recommend using a tripod or monopod instead, since you would still need to hold the camera while it's mounted on the arm. This is just to help relieve some of the weight for bigger video camera rigs.

Q: 2. Is the payload of 22 pounds total payload for the arm/vest? So if my camera rig is 12 pounds and my stabilizer 6-7 pounds, I will be flying 18-19 pounds. Am I good?

A: Yes, the total capacity is 22 pounds. If you are in the 18-19 pound range including your stabilizer this should work fine.

Q: 3. What's the difference between the galaxy vest and the other cheaper comfort vest

A: The vest is rated to a higher weight capacity, to match the capacity of the arm. 39lbs vs 22lbs. They are very similar products, otherwise.

Q: 4. Can this be used with DSLR cameras? Do I need a special plate to attached to that kind of camera or will the enclosed plate work?

A: The FLYCAM 5000 Stabilizer with Sliding QR Platform, Table Clamp, Arm Brace, and Comfort Arm & Vest can easily handle a DSLR. The attachment plate in in the box.

Q: 5. Is there a matching vest for this if I bought it instead of the 5000 bundle with vest?

A: Yes there is. We have this same stabilizer in a kit with an arm and vest. https://bhpho.to/38wOPZO

Q: 6. Does the CRANE 3S handle fit on the stud mount of the arm?

A: No it does not. at this time the only solution for the Crane 3S is the DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for Select Handheld Gimbals (B&H # DITHANOSPC3 MFR # THANOS-PROC3)

Q: 7. Can you mount a BLACKMAGIC 6K PRO ON IT?

A: Yes, the FLYCAM 5000 Stabilizer with Sliding QR Platform, Table Clamp, Body Pod & Arm Brace can mount and support the Blackmagic Design Pocket Cinema Camera 6K Pro.

Q: 8. Would this be compatible with the DigitalFoto Solution Limited Stabilizer Arm Adapter for Universal Single-Handle Gimbal?

A: Yes, the Flycam Galaxy Arm and Vest Stabilizer will support and work with the DigitalFoto Solution Limited Stabilizer Arm Adapter for Universal Single-Handle Gimbal. DigitalFoto Solution Limited Stabilizer Arm Adapter for Universal Single-Handle Gimbal BH #DITH02

Q: 9. Does this vest fit a rather large person? I am 6'4" tall and weigh about 250 lbs with wide shoulders. Or, can you post a sizing chart?

A: The vest is very adjustable and should provide a comfortable and safe fit for you. EXPERIENCE COMFORT WITH ERGONOMIC VEST Lightweight & Foam Padded Vest with highly breathable material provides excellent comfort, perfect fit and unrestricted movements. Easy height adjustment & Velcro straps enable to fit on all body types. A unique and proprietary Arm-to-Vest Connector allows the Support Arm's angle to be adjusted relative to the Support Vest. Push-fit buckles allow you to quickly remove the vest during short breaks. User Manual Flycam 5000 Comfort Arm and Vest: https://bit.ly/3ysjumr

Q: 10. Can this be used with the Canon C100 i?

A: Yes, the canon C100 will fit on the the FLYCAM 5000 Stabilizer. However, depending on the size and weight of the lens, compatibility may vary. Make sure the weight of the camera and lens is within the specified load capacity.