The cocoa Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm locking Connector for Sky Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Sky UT86P wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sky Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this product fully interchangeable with the Bolt CKE2 HV Locking Flash Power Cable (B&H # BOCKE2)? Are there any differences?

A: Ciao, I use this cable to plug in my Nikon SB 900 at Quantum Turbo end they work perfectly!

Q: 2. Will this work on my Sony a6500? If I connect the Saramonic 500 B1 to the second channel of the Polsen MVP-3. https://www.bhphot

A: Yes! It does carry plug-in power to microphones.

Q: 3. Is is work in Rode wireless go? Thanks

A: Yes

Q: 4. Is this compatible with Decimator MD-HX?

A: No, the DECIMATOR MD-HX Miniature HDMI/SDI Cross Converter with Scaling & Frame Rate Conversion uses a 2.5mm barrel connector, while the DECIMATOR Power Pack 12 VDC with Locking Coax Connector for Select DECIMATOR Devices provides a 2.1mm barrel connector. The DECIMATOR Power Pack 12 VDC with Locking Collar for Select DECIMATOR Devices is an alternative power supply from Decimator to consider. See the link below: https://bhpho.to/3HdXQr1

Q: 5. Hi, Can use in the same time 2 x Rode Wireless Go (for both mono conectors) to record with Zoom H1 or H5 (for stereo conector)? I will get in my audio track from recorder both source (sound form both Rode Wireless go)? Thanks

A: We have not tested this arrangement, but it should work based on the cable's description and your desired deployment.

Q: 6. I'd like to know how long is the cable?

A: Cable measures 1 meter/39 inches not including connector.

Q: 7. If it's compatible with Canon 580EX-II I'm assuming it will work with 580EX. Is this correct?

A: Yes, the Impact CZ2 HV Cable will adapt to all canon flashes that offer HV inputs.

Q: 8. How long is the Locking 3.5mm TRS to XLR-Male cable?

A: The cable is 16" long, minus the connectors. End to end, connector to connector it is approximately 21.25".

Q: 9. Is the CZ2 HV the proper cable for the Quantum Turbo SC & Canon 600EX RT ? Thanks in advance

A: Yes, the Impact CZ2 HV Cable is the correct cable for the Quantum Turbo SC and the Canon 600EX- RT.

Q: 10. I have the Quantum Turbo SC & is the cable IM CZ2 HV the correct cable for the Canon 600 EX RT ?. Regards Viv

A: Yes, the correct cable for the Canon 600EX-RT flash is the CZ2 HV Cable. I will post a link to the item below. https://bhpho.to/2hCuIlx