Capture smooth, steady footage with a variety of cameras up to 8 lb with the HD-3000 Video Stabilizer from FLYCAM. Featuring a three-axis gimbal and foam handgrip, this stabilizer makes it easy to capture professional-looking handheld footage, and it can easily be used for panning, tilting, booming, or running. The stabilizer is made of lightweight aluminum and weighs only 2.6 lb.

The HD-3000 has a dynamic camera balance platform that allows balancing the camera on its X and Y axes, and it features a toolless 15.7 to 23.6" telescoping center post for balancing camera rigs up to 8 lb. The included quick release plate installs on the top plate and has 1/4"-20 and 3/8"-16 screws to mount a variety of cameras.

It comes with sixteen counterweights that stack onto the adjustable base to ensure a perfect balance. A table clamp provides a mounting point for the gimbal for balancing and for storing the balanced, assembled gimbal when not in use.

3-Axis Stabilizer, 8 lb Payload    Galaxy Body Vest and Shock-Absorbing Arm    Vest Waist, Chest, and Height Adjustment    Dual Springs with Adjustable Elasticity

Aluminum camera stabilizer with 8 lb load capacity

X- and Y-axis adjustments on camera platform

Sixteen 3.2 oz counterweights for balancing on the 9.5 to 14.5" adjustable base platform

Telescoping two-section center post from 15.7 to 23.6"

Quick release camera plate with 1/4"-20 and 3/8"-16 camera mounting screws

Table clamp for balancing your gimbal and to store when not in use

Related Questions and Answers

Q: 1. Can it be easily inverted for low angle shots?

A: Not that we are aware of. This does not list an inverted or underslung mode.

Q: 2. This lists the max payload as 15.4 lbs, yet the page for the Redking Stabilizer lists the max payload as 7.5lbs. What is the true max payload?

A: If the Stabilizer is used without the arm and vest setup the total payload will be about 7.5lbs, but when combined with the arm and vest kit it can support around 15lbs according to the manufacturer.

Q: 3. Will this work with a Ronin S?

A: The Flycam Galaxy Arm and Vest Stabilizer is meant to be used with Flycam Camera Stabilizers. If you wish to use a steadicam with the Ronin S, you will want to look at: Steadicam Steadimate-S Aero 15 Arm & Aero Vest Kit https://www.bhphotovideo.com/c/product/1493892-REG/steadicam_sdms_a15vk_steadimate_system_with_a_15.html/accessories?sts=pi-ps&pim=Y

Q: 4. Can this be used with the Canon C100 i?

A: Yes, the canon C100 will fit on the the FLYCAM 5000 Stabilizer. However, depending on the size and weight of the lens, compatibility may vary. Make sure the weight of the camera and lens is within the specified load capacity.

Q: 5. Is there a matching vest for this if I bought it instead of the 5000 bundle with vest?

A: Yes there is. We have this same stabilizer in a kit with an arm and vest. https://bhpho.to/38wOPZO

Q: 6. Can this be used with DSLR cameras? Do I need a special plate to attached to that kind of camera or will the enclosed plate work?

A: The FLYCAM 5000 Stabilizer with Sliding QR Platform, Table Clamp, Arm Brace, and Comfort Arm & Vest can easily handle a DSLR. The attachment plate in in the box.

Q: 7. Would this work with a Dji rs3 pro holding a sony a7s3 and a 24-70 lens?

A: Yes, the Flycam Galaxy Arm and Vest Stabilizer would work with the DJI RS 3 Pro Gimbal Stabilizer holding a Sony a7S III and a 24-70mm lens using the Flycam Arm and Vest Gimbal Adapter for Select Gimbal Stabilizers, B&H # FLCMGA, to mount the gimbal.

Q: 8. Does the CRANE 3S handle fit on the stud mount of the arm?

A: No it does not. at this time the only solution for the Crane 3S is the DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for Select Handheld Gimbals (B&H # DITHANOSPC3 MFR # THANOS-PROC3)

Q: 9. Is the payload of 22 pounds total payload for the arm/vest? So if my camera rig is 12 pounds and my stabilizer 6-7 pounds, I will be flying 18-19 pounds. Am I good?

A: Yes, the total capacity is 22 pounds. If you are in the 18-19 pound range including your stabilizer this should work fine.

Q: 10. Can you connect any camera to flycam?

A: The camera mount on this product is universal just about any camera can physically mount on it however the Flycam is only designed to carry 11 lbs. The Flycam works with any camera that is under 11 lbs. (11 lbs. includes any accessories that you may mount such as monitors, lenses, batteries etc)