The light beige Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this adapter provide stereo input?

A: Yes, the RED DIGITAL CINEMA DSMC3 RED 5-Pin LEMO to 3.5mm Female Audio Adapter (11.3") is a stereo cable.

Q: 2. How does the light output of this light compare to an Arri M18? Is the brightness similar?

A: The Arri M18 is about 6x the power output of the Razyr.

Q: 3. Will the output of the Rayzr 7 300 Daylight be reduced if ran on battery? And what battery power would you need to output 100%. Also, what's the runtime on battery?

A: From the manufacturer; At this time, the Rayzr 300D does not run off of a battery. Rayzr does not have an accessory option to run this particular fixture from a battery and discourage any 3rd party batteries. At NAB they showed a solution (special plate) but at this time it is not available. The Rayzr 200, 200BM, 300B can all be powered from a V-Mount plate that is available but will not power the 300D. 10202207 V-Mount Battery Plate V-Mount Battery Plate (**Not compatible with Rayzr 7 300w Daylight**)Includes: Quick Release Fitting DC Cable D-tap to NL2FX (50cm). 14.4V V-Mount Battery can Power the Rayzr 7 200BM. 26V V-Mount Battery can Power the RRayzr 7 200 Daylight and 300B.MSRP: $79.00

Q: 4. Will this work with the c200?

A: Yes it will. The C200 uses the same battery system as the C300 Mark II.

Q: 5. What does the premium pack include?

A: As shown under In the Box , the following items are included.Rayzr 7 7 300W Daylight LED Fresnel Light (Premium Pack)4-Leaf Barndoor for Rayzr 7 LED FresnelPower SupplyTravel CaseLimited 1-Year Warranty

Q: 6. Output compared to a tungsten or HMI is?

A: The output equivalent given for this fresnel would be based on tungsten.

Q: 7. Does this plug into a standard wall outlet? Is there an on/off switch?

A: I haven't installed yet.

Q: 8. Will this cable work with the RED Touch Pro 5.0?

A: I use it with a 7 and works great. Can't say for certain with the 5.0, but educated guess says yes.

Q: 9. Can you get this light with an Anton Bauer batt connector instead of v mount?

A: Unfortunately, the manufacturer only offers a V Mount plate such as the Rayzr 7 V-Mount Battery Plate for Rayzr 7 200, 200BM, 300B B&H # RAVPR7 to power this light on location. An option to convert the battery plate is the Anton Bauer V-Mount to Gold-Mount Adapter Plate for Sony F5/F55 CineAlta Cameras B&H # ANQRC4KS, however it has not been tested to our knowledge.

Q: 10. Are the rod clamps fixed or are they adjustable?

A: Yes, the IndiPRO Tools V-Mount Plate for Canon C300 Mark II are adjustable, and will allow you to possition ( tilt) the v-mount.