The cocoa Countryman E6 Directional Earset Mic, Medium Gain with Detachable 2mm Cable and 4-Pin Female Proprietary Connector for Fender Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this adapter work for 5-Pin DMX?

A: The Sescom NHA5F5F 5-Pin Female to 5-Pin Female Inline Adapter Barrel is an audio inline adapter, and it does not work with 5-pin DMX protocol devices.

Q: 2. Will this work for the black magic pocket 4k/6k mini xlr port to sennheiser g4 lav mics?

A: No, the Kopul cable will not work because it has the wrong types of connectors on both ends. The Sennheiser wireless receiver requires a locking 3.5mm TRS male connector and the camera's input requires a 3-pin mini-XLR (TA3) male connector. You can use the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K - Black (B&H # KOMINIPLSBK) to connect the output from the wireless receiver to the camera's mini-XLR input. If you decide to connect the wireless receiver to the camera's 3.5mm input, you can use the Sennheiser CL1 3.5mm to 3.5mm Output Cable for EW Series Camera-Mount Receiver (B&H # SECL1).

Q: 3. I want to connect the JVC M-510 Electret Condenser Super-directional Microphone with a Nikon D750 and Nikon Z6. Will it work?

A: The mic reuires power to operate. This cable will not provide it, nor will the cameras.

Q: 4. Is this cable balanced ?

A: No, the Kopul XRSM cable is an unbalanced cable which can be used for connecting a microphone or line level signal to an unbalanced audio input on a camera, recorder, mixer or other device.

Q: 5. Does this send the same signal to both left and right inputs on the camera?

A: Yes. The Kopul XRSM-10B will send a signal from a 3-pin XLR to the left and right channels of a camera. Be mindful of the differences between line and mic, as a line signal will overload a mic input and cause distortion.

Q: 6. Can I use a SM58 into my DSLR with this?

A: Yes as long as your camera has a 3.5mm mic input.

Q: 7. Will this work with the Canon R-5?

A: No, the Rollocam Camera Trigger Cable with 2.5mm Male to 3-Pin Female for Canon EOS Cameras is not compatible with the Canon R5.

Q: 8. I own a Audio-Technica ATH-M50xSTS Analog version, I wanna connect it to my PC. Because the mic jac is XLR can I do this?

A: No, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable will not enable connection for the mic from the Audio-Technica ATH-M50xSTS StreamSet Headset with XLR and 3.5mm Connectors through the computer's 3.5mm input. The computer's input will not supply enough voltage to power the microphone. The best option for connection of the ATH-M50xSTS would be to use a USB audio interface with an XLR mic input that can supply phantom power.

Q: 9. Will this cable connect my Deity Microphones V-Mic D3 Pro to Canon C70?

A: No, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable is not compatible for connection to the Canon EOS C70 Cinema Camera which has a 3.5mm input as well as two TA3 3-pin mini-XLR inputs. The Kopul XRSM Cable has a standard size female XLR connector and you would need a mini-XLR male connector to connect the mic to the camera's mini-XLR input. You can use the Kondor Blue Mini-XLR Male to 3.5mm Stereo Mini Cable -12" (B&H # KOTRS35FBM) to connect the Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone to the camera's mini-XLR input.

Q: 10. Can I use this to my Dji Mic 2 and my Zoom H4N Pro?

A: No, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable will not connect the receiver output of the DJI Mic 2-Person Compact Digital Wireless Microphone System to the input of the Zoom H4n Pro 4-Input / 4-Track Portable Handy Recorder. The XLR connector on the XRSM has the wrong gender for this application. A recommended cable to perform this function is the Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male (BH #HOHMX003Y).