The light beige Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 4-Pin Hirose Connector for Azden Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 4-pin Hirose connector for direct connection to Azden UHF 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. does this have a headphone out?

A: No it does not have output for headphones.

Q: 2. Hello. Is it possible to connect a Rode Stero Video Mic (self powered) microphone to the auxiliary input of the transmitter to transmit stereo signal? Thankyou!

A: If the Rode is capable of outputting a line level signal then it will transmit. I'm not sure whether it would be in stereo however.

Q: 3. Would a tripod 40" long be able to fit?

A: The Interior is 39" long 1 " to short.

Q: 4. How many light stands can the case hold if you have three Aputure 300C lights?

A: The Impact Light Kit Roller Bag #2 (Medium, Black) BH #IMLKBR2V3 is not large enough for three Aputure 300c and stands.

Q: 5. What is the minimum height for the Rotolight light stand with legs extended, without using extensions?

A: The minimum height of the Rotolight Portable Light Stand for AEOS (Medium Weight) without the extensions is 19.29" inches (49 cm).

Q: 6. I can't find another bag that's a few inches longer

A: The Impact LKB-RCS LIGHT KITBAG ROLLING C STAND CASE.bh#IMLKBRCS Interior Dimensions 51 x 9.5 x 5.3" / 130 x 24 x 13 cm https://www.bhphotovideo.com/c/product/1241011-REG/impact_lkb_rcs_light_kit_bag.html/specs

Q: 7. In the promotional video by Matt from Azden, is he using the Azden SMX-30 in the vid and which mode: stereo or mono? Thanks for your help.

A: Did he give any hints or have you been listening carefully to it?

Q: 8. does it has background Hiss sound , when compared to rode video mic pro or plus ?

A: I have not heard any background hiss with this unit.

Q: 9. I have a Tascam X-Y mic that just failed on one channel because of the tiny slender cable. Does this cable feel robust?

A: Yes, the cable for the Azden SMX-30 Stereo/Mono Switchable Video Microphone does feel more durable and robust than the cable for the TASCAM TM-2X Stereo XY Condenser DSLR Microphone (B&H # TATM2X).

Q: 10. Will it work with Black Magic Pocket 4K?

A: Yes, the SMX-30 will work with the BMPCC 4K but must be plugged into the 3.5mm mic input jack (not the mini-XLR input). Furthermore, you will have to adjust the audio settings to use the 3.5mm mic input. The auto-on feature will work when set up properly. You will need to find a third party mounting solution since the BMPCC lacks a traditional cold-shoe mount. Using a camera cage with a shoe mount would be one option. The SMX-30 has a 1/4"-20 female thread at the bottom, so using a thread adapter would be a second option.