The cocoa Countryman E6 Directional Earset Mic, Medium Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Sony Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with the Bolt Cyclone x pp-600 (B&H # BOPP600 MFR # PP-600) ?

A: In order to best assist you, please email us with the model of flash you plan to use with this battery pack and cable at photo@a href= http://bhphoto.com. target= _blank bhphoto.com./a Thank you.

Q: 2. How long is the cable? Can it be used to replace the short XLR cable of the Sony UWP D series receiver for signal into the XLR on the recorder?

A: The Sony EC-1.5BX 3-pole Locking Mini-Plug to XLR Cable (Female) is 1.5 feet long (0.46 meters). This cable has a female XLR connector. The one you will need for sending the output from the wireless receiver to an XLR input on the recorder is the Sony EC-0.46BX 3-pole Locking Mini-Plug to XLR Cable (Male), which is B&H # SOEC0.46BX, and it is also 1.5 feet long (0.46 meters).

Q: 3. can I use this with the URX-P03 model?

A: This cable will connect to the Sony URX-P03 receiver, or any Sony receiver with a 3.5mm locking connector.

Q: 4. Is this also compatible with Sony's HVL-F43M flash unit?

A: No. This flash does not allow an external power source.

Q: 5. What is the length of the cable?

A: The length of the Sony EC-0.46BX 3-pole Locking Mini-Plug to XLR Cable is 0.46 meters or 1.5 feet.

Q: 6. Is this compatible with the Teradek Bolt 500XT transmitter?

A: Yes, this has the proper connection to work with the Bolt 500XT.

Q: 7. Does this come with the power cable? And if not, which power cable works with it?

A: A power cable is included to connect to compatible Teradek products.

Q: 8. Can anyone confirm if this will work with the new Bolt 4K LT 750 transmitter?

A: The Bolt 750 4k LT will only work with Vmount plates like the following. Vmount Battery side - https://www.bhphotovideo.com/c/product/1507496-REG/teradek_11_0854_pro_battery_plate.html Vmount Camera side - https://www.bhphotovideo.com/c/product/1500409-REG/teradek_11_0855_bolt_4k_v_mount_battery.html

Q: 9. Hi, will this work with the Sony Utx-b40 transmitter? I'm looking to get a line out from a sound desk wirelessly. Cheers, Colm

A: Yes, the Sony EC-1.5BX 3.5mm Locking Mini-Plug to Female XLR Cable (4.9') is fully compatible with the Sony UTX-B40 Wireless Bodypack Transmitter .

Q: 10. would this work to connect a mic to a Sennheiser AVX Transmitter?

A: This SONY cable is wired differently than those for Sennheiser products. It will not work. Use this one: Sennheiser CL-100 1/8"-Male Mini Jack to XLR-Male Connector Cable for Sennheiser EK100 Receiver B&H # SECL100: https://bhpho.to/38PeAST