The UniFi Building-to-Building Network Bridge from Ubiquiti Networks is engineered to be an easy solution for connecting two separate buildings' networks, and achieving gigabit speeds in the process. This 2-pack of radios include a pole mounting kit for installation on each building's rooftop. Each radio is aimed at each other to connect networks over a 60 GHz signal for up to 1.7+ Gb/s bi-directional speeds.

Link Two Networks Across Buildings    Wireless 60 GHz for Up to 1.7+ Gb/s    5 GHz Redundant Backup Connection    Line-of-Sight Range Up to 1640' Away    Built-In LED Rings for Easy Alignment    Powered by Gigabit PoE (48V, 0.32A)    Supports UniFi Network Controller App    Durable UV-Resistant Polycarbonate Shell    Pole Mounting Kit Included

The bridge radios require direct line-of-sight to connect to each other, and the built-in LED rings on each radio give you a visual indicator of where to aim each one. If the radios are mis-aligned, more of the ring will light red. As the radios pick up each other's signal, the rings turn blue. A solid blue ring on each radio means they are positioned correctly.

In order to achieve speeds of up to 1.7+ Gb/s, the radios utilize a 60 GHz signal to transmit information. At 60 GHz, the signal can attenuate due to solid objects or inclement weather getting in the way. This is why Ubiquiti added a more robust 5 GHz redundant backup signal for the radios to use if needed, but if used, networking speeds will be diminished.

The radios have a single Gigabit PoE connection for information and power, helping you setup the bridge connection in minutes.

With a clear line-of-sight, the UniFi Building-to-Building Network Bridge can link two networks together from up to 1640' away.

This kit can be monitored and setup via the UniFi Network Controller app for iOS and Android devices. UniFi Network Controller lets you control an entire end-to-end system of network devices across different locations from a single interface.

Wall mountable with an optional kit

Durable UV-resistant polycarbonate shell

Related Questions and Answers

Q: 1. Can it be powered from the second port of UAP-AC-PRO?

A: No, the second port on the UAP-AC-PRO would not pass the power through to the Ubiquiti Networks UniFi Switch Flex 5-Port Managed Gigabit PoE Network Switch BH #UBUSWFLEX.

Q: 2. If I change my router does the GigaBeam need to be re-configured?

A: No, changing the router would not require the system to be re-configured.

Q: 3. Will this work on a Ltu rocket?

A: The Ubiquiti Networks UniFi PoE++ Adapter would not work with the Ltu rocket. We recommend that you use the 24V, 1A gigabit PoE adapter that comes with the purchase of the Ltu rocket.

Q: 4. can i use this with Ubiquiti Networks UniFi Managed PoE+ Gigabit 8 Port Switch with SFP (150 W) if not any advice which one can i use ?

A: Per Ubiquiti's datasheet for this product, the recommended power methods are the Unifi 50V/60W PoE adapter (not included; BH #UBPOE5060W), and the Unifi USW-24-POE and USW-Pro-24-POE switches. You could use it with the switched you indicated as long as you also use the PoE adapter.

Q: 5. Can this be powered by a PoE injector?

A: Yes, the Ubiquiti Networks UniFi Switch Flex 5-Port Managed Gigabit PoE Network Switch BH #UBUSWFLEX can be powered by PoE injector.

Q: 6. What is the environmental temperature limits? The camera is good-looking but most outdoor devices are white to reflect heat from direct sunlight.

A: Environmental Operating Temperature -40 to 122°F / -40 to 50°C Operating Humidity 0 to 90% IP Rating IP66

Q: 7. Does this have WifiMan VPN support?

A: The Ubiquiti Networks UniFi Express, B&H # UBUXUS, has limited support for the Teleport VPN feature along with WiFiMan, the VPN performance has been reported to be slow. It would be best to get the Ubiquiti Networks Cloud Gateway Ultra, B&H # UBUCGULTRA, for better VPN performance when using the Teleport VPN feature with WiFiman.

Q: 8. Can I use this wireless bridge to connect an IP camera to the internet for live viewing?

A: You can use the Ubiquiti Networks GigaBeam Wireless Bridge to create a reliable point-to-point connection between networks. However other devices would required as well to make the live viewing possible.

Q: 9. Can use this Ubiquiti bridge to extend an existing Cisco LAN to another building or do I need to have Ubiquiti switches on both sides?

A: Does not have to be Ubiquiti switches. https://dl.ubnt.com/qsg/GBE/GBE_EN.html

Q: 10. What is the maximum or recommended distance for deployments of this item?

A: Assuming a clear unblocked line of sight the manufacturer stated max range is 1640'.