The Auray Windbuster for Rode VideoMicro and VideoMic Me-L and Me-C Mics is a dual-layer fur windscreen that's custom tailored to fit a Rode VideoMicro shotgun microphone outfitted with a Rycote Lyre shockmount. It also fits the Rode VideoMic Me-L iOS microphone and the VideoMic Me-C Android microphone. Best for recording in light breezes (4 to 25 mph), this windbuster substantially reduces disruptive wind noise by up to 40 dB with only minimal high-frequency loss.

By incorporating an open-cell foam matrix surrounded by high-quality simulated fur, the WSW-VMICRO forms dead air space around your microphone, attenuating the unwanted wind noise without muffling the sound. Plus, it protects your mic from dust, moisture, and UV damage—all issues commonly encountered during outdoor shoots. The WSW-VMICRO's drawstring closure enables a snug, airtight fit over your Rode VideoMicro, VideoMic Me-L, or VideoMic Me-C, while allowing easy removal.

Dual-Layer Wind Protection    Accomodates Rycote Lyre Shockmount    Reduces Wind Noise up to 40 dB    Reduces Vocal Plosives    Protects Mic from Moisture and Dirt    Tailored Fit    Simulated Fur Outside    Open-Cell-Foam Matrix Inside    Fits VideoMicro with Rycote Lyre    Fits VideoMic Me-L and Me-C

Don't let wind noise obscure what you're saying. This windbuster is custom tailored to fit the Rode VideoMicro shotgun microphone with a Rycote Lyre, and it's perfect for reducing wind noise for mobile journalism, run-and-gun productions, or vlogging. It also fits the Rode VideoMic Me-L iOS microphone and the VideoMic Me-C Android microphone.

The simulated fur outer cover and open-cell foam matrix work together to reduce wind noise by 30 to 40 dB and allow you to capture audio with minimal high-frequency loss and without muffling the sound.

A light breeze (4 to 25 mph) may not feel like a lot of wind, but it's enough to make your microphone pick up a lot of noise. This windbuster significantly reduces wind noise by up to 40 dB, so your subject's voice won't be obscured.

Related Questions and Answers

Q: 1. Will this fit a Audio Technica AT8035?

A: . The slip-on design of the WS6 features dimensions that accommodate the Rode NTG4, NTG4+, NTG2 and NTG1 microphones; as well as any shotgun or stereo mic with a length of 6.25" (160.5mm) and diameter of 0.88" (22.5mm). Audio Technica AT8035: Dimensions ø: 0.83 x L: 14.53" / ø: 21 x L: 369 mm Use this one: Rycote Standard Hole Classic Softie Wind-Screen (9.4" Long, 0.7 to 0.8" Diameter Hole, Gray) B&H # RYS24M: https://bhpho.to/35Ns5CT

Q: 2. Will this work with a Samsung Galaxy S22 Ultra?

A: Yes, the Rode VideoMic Me-C Directional Microphone for Android Devices is compatible for use with a Samsung Galaxy S22 Ultra Smartphone.

Q: 3. Would this also work with iPads that have USB-C?

A: Yes, the Rode VideoMic Me-C is compatible for use with iPads that have a USB-C connector.

Q: 4. What's the difference between this and the dead wombat that comes in the blimp kit? Is one better than the other.

A: I literally have both. This works well when the wind is now point towards the direction of the wind.For near silence, go with a blimp. Added wombat shield is absolute noise reduction. This is great if you can only afford this. But TBH, id save the difference and get a Rhode.

Q: 5. How much better is this versus the windshield that comes with the rode videomicro already?

A: This windshield is identical to the one that comes packed with the Rode videomicro. Don't buy the windshield separately like I did.

Q: 6. Will this work with older version of Rode VideoMic Pro (earlier shockmount)?

A: Yes, this is compatible with the original Video Mic Pro.

Q: 7. Will this work with the Rode NTG5?

A: Its too long for the NTG5 will not fit properly will leave alot of room between front of mic to the front of windscreen need a shorter version like the one below. https://www.bhphotovideo.com/c/product/225595-REG/Rycote_033032_Standard_Hole_Softie_Windscreen.html

Q: 8. It is too small to fit over the Rode stereo VideoMic Pro's foam. Was it designed to fit over this mic once the foam has been removed?

A: It is not designed to fit over the foam windcover.

Q: 9. Will this work on the new RODE VideoMic Pro+?

A: Yes. The Auray WSW-VMP-R Windbuster will work with the new Rode VideoMic Pro plus.

Q: 10. Windshield SPECS say Maximum Microphone Length: 6.25 (160.5mm) but NTG2 SPECS say 10.94 x .87 (278 x 22mm) (Length x Diameter) PLEASE clarify because I just placed an order ?

A: I wish I could post the picture I just took. The Windshield fits perfectly on the NTG2. 10.94 is including the section I would call the handle .