You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6i Omnidirectional Earset Mic, Standard Gain With Detachable 1mm Cable And Ta3f Connector For Audix Wireless Transmitters (tan)

Countryman E6i Omnidirectional Earset Mic, Standard Gain With Detachable 1mm Cable And Ta3f Connector For Audix Wireless Transmitters (tan)
  • Product Code: ga76929
  • Availability: In Stock

$1,649.85 $2,491.27

The tan Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and TA3F Connector for Audix Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA3F connector for direct connection to Audix B60 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersAudix: B60
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB (A-Weighted)
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x TA3F/Mini-XLR 3-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAudix: B60
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB (A-Weighted)
Sensitivity7.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x TA3F/Mini-XLR 3-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What's the transmit power of these antennas in db?

A: The transmit power is not specified by the manufacturer, sorry.

Q: 2. Can this be used to supply power for the Electro-Voice RE92L?

A: The APS911 is designed for use with Audix mics that feature a mini XLR connection. Unfortunately not confirmed to operate with non Audix mics due to differences in mic wiring and power requirements.

Q: 3. I'm looking for a cable to run from the Zoom F8n output (TA3) to the audio input on the Blackmagic ATEM mini (TRS). Will this work? Or is there a better option?

A: Due to balancing issues this may be a noisy connection. You would be better off taking the 3.5mm output directly to the ATEM.

Q: 4. Will this work or is it compatible with the Iphone 5S as well? I have a Canon 1D MK IV and wanted to know if the App is compatible with the Apple Iphone 5s

A: Currently it is only listed as being compatible with the iPhone 5, but no mention of the 5S model. Here is a link to their app in the APPstore for you to regard in full detail:https://itunes.apple.com/gb/app/ioshutter-slr/id452177712?mt=8

Q: 5. Does the 50 microboom come with a clutch (to connect the boom to a mic-stand) ?

A: The Audix MicroBoom Carbon Fiber 50 Boom attaches to any microphone stand with the included MCBOOM mic stand adapter. This adapter allows for the total control over the angle, rotation and position of the carbon fiber boom.

Q: 6. Do these work with the smart controller?

A: The DJI Transmission High-Gain Antenna Set (4-Pack) provides an SMA connection which the DJI Smart Controller accepts, but there is no guarantee of performance.

Q: 7. Will this work with any mic with a mini-XLR connector, or only with Audix? Thanks.

A: Yes, the Audix MicroBoom 84 Carbon Fiber 84" Boom can be use with any microphone that has a mini-XLR connector. The MicroBoom 84 has a mini-XLR female connector on the top to attach the mic and terminates with a mini-XLR male connector at the bottom. The MicroBoom attaches to any microphone stand and can be used horizontally or vertically.

Q: 8. Do these work with the Mavic 3 Cine / Pro Remote?

A: No, the DJI Transmission High-Gain Antenna Set (4-Pack) are only compatible with the DJI High-Bright Remote Monitor, they are not compatible with DJI drone remotes.

Q: 9. Does it support Nikon DSLRs? I don't see any Nikons listed in the compatibility list!

A: Yes it does, but there are different packages for different cameras and you need to stipulate which you want. It wasn't clear on the site and I got the wrong one to start with. FYI, you can also use it with the TriggerTrap app. It's cheaper and no different.

Q: 10. Can this be used with other than Audix mics?

A: It's actually a bit more complicated that John P's answer. You have to make sure the polarity on the mic you want to use is matched to the polarity of the power supply. I bought this power supply intending to use it with a non-Audix mic but the polarities were not matched and I only got a very faint, noisy signal. Bought an Audix mic and it works great.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Bose Bass Module 700 (arctic White)

$2,547.00 $3,744.09

Belkin Hdmi To Dvi Cable (12')

$44.85 $71.76

Smallhd Power Supply For Cine 13 Monitor

$447.00 $594.51

Fotostrap Blush Camera Strap

$344.85 $420.72

Neewer Nd Filter (4 X 5.65", 1-stop)

$238.47 $288.55

Nanuk 930 Hard Case With Pro Photo Kit (olive)

$1,199.85 $1,451.82