The light beige Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and TA4F Connector for CAD Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to CAD Audio WX155A wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits CAD Audio Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. We cannot get this to work on our Mac laptop. They can hear us but we can't hear them once it's plugged in...?

A: Eject the USB microphone from the computer desktop. Unplug it from the computer, Shut down the computer and then restart it after 30 seconds or so. Then plug the micrphone back in. If this does not provide remedy, please contact our Customer Service department: 800.221.5743 cs@bhphotovideo.com

Q: 2. Will this mic TX1600 work with the GX1610 wireless system?

A: Hi Phillip, The TX1600 will work with the GX1610.

Q: 3. Can you use a second GXLIEM4 to have 8 monitor mixes? Will it have interferace?

A: Yes, it is possible to use two CAD GXLIEM4 Quad-Mix In-Ear Wireless Monitoring Systems simultaneously in order to have eight monitor mixes. Additionally, if you only need four mixes, you can add more receivers to one system and set them to listen to any of the four channels. There is no limit for the number of receivers that can be used with one system or any of its individual channels.

Q: 4. What is the range in feet

A: The GXLV is a VHF wireless system with 10 milliwatt transmission power. Range will be anything from 100 to 1000 feet. It is not possible to give a system exact operating range in feet because the operating environment must be taken into consideration. All wireless systems will perform best when the receiver gets strong signal from the microphone transmitter. This happens when the user has a clear line of sight between the mic/transmitter and the receiver.

Q: 5. Hi friends, before ordering the Transmisor GXLIEM4,I would like to know if I can connect it directly to notebook to transmit through zoom app 4 speakers, or is it necessary to pass through an audio table? BR, Abraham

A: You could come directly from a headphone into the transmitter with a 3.5mm to 1/4" cablle. You would need to send a mono signal out of the headphones. This unit however is made to transmit to headsets, not speakers.

Q: 6. What are the interior dimensions?

A: The Impact Light Kit Roller Bag #2 dimensions are: Interior: 39 × 13 × 9.5 in. (99.1 × 33 × 24 cm) Exterior: 41.75 × 15 × 11 in. (106 × 38 × 28 cm)

Q: 7. What is the audio pickup range for this mic?

A: Hi Michaela, We don't have an exact number for that, but the sensitivity can be adjusted to pick up sources further away if needed.

Q: 8. What is the delay specification? It is not listed in the specs

A: The delay/latency specifiction is notpublished by CAD. Please contact CAD directly for details: CAD Audio Corporate Offices: 6573 Cochran Rd., Bldg. I Solon, OH 44139 U.S.A. Tel: (440) 349-4900 Fax: (440) 248-4904

Q: 9. Stereo or mono?

A: Mono

Q: 10. What type of mount adapter I need for the mic?

A: The EVO SR1 Condenser Microphone included with the Audient EVO Start Recording Bundle come with an EVO shockmount that will attach directly to a mic stand, as well as an XLR cable to connect the mic to the input on the EVO 4 USB Audio interface.