You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6i Directional Earset Mic, Low Gain With Detachable 2mm Cable And 6-pin Hirose Connector For Samson Wireless Transmitters (black)

Countryman E6i Directional Earset Mic, Low Gain With Detachable 2mm Cable And 6-pin Hirose Connector For Samson Wireless Transmitters (black)
  • Product Code: ga77050
  • Availability: In Stock

$1,964.85 $2,829.38

The black Countryman E6i Directional Earset Mic, Low Gain with Detachable 2mm Cable and 6-pin Hirose Connector for Samson Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersSamson: BT3, CT2, TX4 (Gray), UT4
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB (A-Weighted)
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Analog Output1x Hirose 6-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersSamson: BT3, CT2, TX4 (Gray), UT4
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB (A-Weighted)
Sensitivity0.6 mV/Pa
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level39 dB (A-Weighted)
Connectivity
Analog Output1x Hirose 6-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.079" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBlack
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can I use the Shure shock mount for the Shure SM58, etc for this mic?

A: The SHURE A55HM Snap-In Shock Stopper B&H # SHA55HM) is a half-mount isolation mount and swivel adapter. The mount has standard threads for use with a variety of mic stands and boom arms. The half-mount design provides quick and convenient mounting and unmounting of microphones, and the built-in elastics provide isolation from unwanted vibrations. The mount is compatible with virtually any tapered microphone, including the Samson Q6 which is very similar to the SHURE SM57, SM58, SM86, Beta 57A, Beta 58A, and Beta 87C. a href= http://bhpho.to/1xrlZTr target= _blank http://bhpho.to/1xrlZTr/a

Q: 2. As this is a Studio Stereo Mic. Does that mean that, when wearing headphones, you can hear the sound from either side of your head? E.g. If I click my fingers on the right hand side of the mic, I'll hear the click in my right ear, not my left or visa versa?

A: The Meteor Mic is a mono microphone with no separation between right and left.

Q: 3. How wide is the clip to connect to a 10 year old Viewsonic 42" monitor top?

A: The clip is 30mm wide, the back portion of it (the first photo shows it used as the base of the mic) is 50mm deep, the two joints in that arm allows for putting the mic on something up to 65mm thick (if the back portion is held at ~90 degrees). Fully unfolded, the arm will accommodate anything up to 116mm thick (about 4 5/8"). Hope this helps.

Q: 4. hardware or software noice cancellation? Cheers

A: thank you for your question. this unit does have active hardware noise cancellation.

Q: 5. will this work with windows 10?

A: The GoMic is a USB 2.0 Plug n Play compatible device. It will work with all current Operating Systems including Windows 10.

Q: 6. Its godos for podcast?

A: Yes, this type of microphone is appropriate for podcasting.

Q: 7. Where do you store the lapel mic when detached from the trasmitter?

A: The Samson Go Mic Mobile Carry Case (BH # SASWGMMC) will accommodate the Samson LM8 lavalier that Samson includes with some of their Go Mic Mobile systems.

Q: 8. I need help to pair Samson RXD2 wireless USB receiver with my XPD1 wireless handheld Mic. ?

A: Press and hold the Pair button on the receiver for more than 5 seconds and it will begin to flash. Then press and hold the Power Button on the transmitter until the LED indicators on both units light steady (no flash). Your transmitter and receiver are now paired. https://www.bhphotovideo.com/lit_files/522198.pdf

Q: 9. Is it possible to wall mount this speaker?

A: You can purchase a wall bracket that used the standard poll bracket at the botttom to mount. This is what we use; https://www.amazon.ca/dp/B001CR64BE/ref=cm_sw_r_sms_c_api_CDJMBbF4ZK8R5

Q: 10. Is this unit able to sync up with a Samsung 7 smart phone to play music? Am I able to purchase additional microphones for this unit at a later time if needed?

A: It will sync up with any smart phone - just has to have bluetooth capabilities (which all do). Wirelessly, you can only use the one microphone. But the XP106wDE also has 1/4 inch inputs and an xlr input so you could use additional wired microphones and/or instruments.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Vijim Ls21 Desk Mount Stand

$420.00 $533.40

Vijim Ls22 Desk Mount Stand

$270.00 $326.70

Mount-it! Articulating Desk Stand For Laptops

$779.97 $1,006.16

2n Clip Desk Stand

$90.00 $143.10

Products You May Like

Fujia Appliance 12v Ac Power Supply

$38.94 $51.01

Cinemilled Mitchell To Mitchell 6" Riser

$1,349.97 $1,862.96

Digital Forecast Bridge X_ts Mini

$2,364.00 $3,758.76

Kupo Baby Ball Head Adapter

$92.85 $132.78