The tan Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and LEMO 3-pin Connector for Zaxcom Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to Zaxcom TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Zaxcom Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work for Canon ZR45MC? Thank you.

A: Yes, the Pearstone FireWire 400 4-Pin to 6-Pin Cable - 3' (0.9 m) BH #PECFW463 is compatible with a Canon ZR45MC.

Q: 2. Are these only for the transmitter, not the receiver?

A: DJI lists that the DJI Transmission High-Gain Antenna Set (4-Pack) is made specifically for the DJI Wireless Video Transmitter (DJVDC).

Q: 3. Is this the adapter I'd need to run power from the V-Mount battery to the Aputure LS 60D? Thanks

A: The Aputure Amaran D-Tap Power Cable (2-Pin) BH #AP0152A30 is for the P60c and P60x.

Q: 4. can this be used as timecode input?

A: The RED DIGITAL CINEMA DSMC3 RED 5-Pin LEMO to 3.5mm Female Audio Adapter (11.3") can be used with a timecode device like the Deity Microphones TC-1 Wireless Timecode Generator Box (Bluetooth, 2.4 GHz) to accept LTC timecode from the 5-pin port on the camera bodies themselves.

Q: 5. Can this cable be used to power the SmallHD 503 from a D-tap battery?

A: Yes it can.

Q: 6. Hi! Will this Pearstone FireWire 4-6 pin cable work with a Panasonic PV-GS320? Tried another brand and 4pin side is too big, won't fit.

A: Yes, the Panasonic PV-GS320 3 CCD Mini DV Camcorder, 10x Optical Zoom, 3.1 Megapixel Pictures, Color Viewfinder, 2.7" LCD Screen, SD/HC Memory Card Slot is compatible with the Pearstone FireWire 400 4-Pin to 6-Pin Cable - 3' (0.9 m) so long as the host computer contains the 6 pin connection,

Q: 7. will this work with the aputure ls 60x?

A: No, the Aputure Amaran D-Tap Power Cable (2-Pin) is not compatible with the Aputure LS 60x Bi-Color LED Focusing Flood Light.

Q: 8. Would this item work with the Amaran 100X?

A: No to connect a p tap battery you would need a 3pin xlr like the Litepanels Anton Bauer D-Tap to 3-Pin XLR Cable B&H # LIPTXC

Q: 9. Does it support Nikon DSLRs? I don't see any Nikons listed in the compatibility list!

A: Yes it does, but there are different packages for different cameras and you need to stipulate which you want. It wasn't clear on the site and I got the wrong one to start with. FYI, you can also use it with the TriggerTrap app. It's cheaper and no different.

Q: 10. Can I run 60x with a V-mount battery at 100%?

A: yes this will work on your aputure 60x.