The tan B3 Omni Lavalier Mic, Standard Sens, with TA3F Connector for RAD360-BP Wireless Transmitters from Countryman is a water-resistant, miniature lavalier microphone for capturing high-quality audio. It can be used in a variety of applications such as a tie-clip lavalier in interviews, a hair-hidden mic for drama, a water-resistant mic for water sports and hurricane reporting, or simply a small mic to hide in a prop flower vase.

The B3 capsule is resistant to moisture (IP67), which allows for placement in the hair or on bare skin, and its omnidirectional polar pattern minimizes handling noise, wind noise, and plosives (popping). Furthermore, a variety of skin-matching colors are available. This B3's cable terminates to a TA3F connector for direct connection to RAD360-BP Audix wireless bodypack transmitters Additionally, a carrying case, two cable clips, a windscreen, and three protective caps are also included.

For Interviews, Drama, and Water Sports    TA3F (AD), See Description    20 Hz to 20 kHz Frequency Response    Headroom for General Use    Includes 3 Capsule Protection Grids    Windscreen    Cable Clips    Carrying Case

Looks great when you want to see it, virtually disappears when you don't. The B3 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B3 is resistant to makeup, sweat, and moisture when used with the supplied protective caps and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B3 provides high-quality audio with low distortion at SPL up to 140 dB for wireless applications. The aramid cable and thin diaphragm combine to offer low handling noise. The flat-frequency response accurately captures voice or instruments, and the small size makes the B3 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high-overload capability for recording instruments.

Standard, for most uses.

Related Questions and Answers

Q: 1. Can a 2nd receiver be purchased for a 2 camera set-up?

A: Yes it's a Special Order item. BH #SAUWMIC9RX9 and you must order it in the same frequency block as the one you have or it will not work.

Q: 2. Does the receiver needs to be plugged in with both XLR to the camera or you can simply use one if you are using only one transmitter ? I'm shooting with an FS7 and I would love to be able to leave my shotgun mic plugged in when only interviewing 1 person.

A: You will need to plug the 2 XLR connectors to the camera.

Q: 3. Will this work with an iPhone 12 Pro and DJI OM4?

A: USB/Lightning Connectivity 1 x Lightning (Audio, Bus Power) Power Requirements Bus Power (Lightning) On the DJI OM4: Connectivity Ports 1 x USB Type-C (5 VDC Power) Input 1 x USB Type-A (Power) Output Wireless Frequency Remote: 2.4 GHz Wireless Protocol Bluetooth 5.0 This output port may be connected to phone to supply power to phone.

Q: 4. will this work with iphone 10 and newer?

A: This will work on iPhone 10 or later, you may need to update your operating system though.

Q: 5. ABOUT SARAMONIC UWMIC9:I'm wondering if the combo made of one transmitter and one receiver can accommodate adding a second transmitter, purchased separately?Looking for a smart purchase but can't afford the (x1) RX and (x2) TX package at the moment.

A: Yes. You can buy a kit of 1 tx and 1 rx now and later on purchase a single tx.

Q: 6. How long is mic to transmitter cable?

A: This lavalier microphone that connects to the transmitter is 4ft long.

Q: 7. can you tell me which version of the receiver do you sell? (V.2.6 Rel 682101A or V.2.7 795101A) ???

A: We don't seem to have either one. The Saramonic receiver we sell is MFR #UWMIC9RX9. The other numbers you sent don't bring up anything in our catalog.

Q: 8. What microphone is the equivalent for this set? I have two mics from this kit that I need to replace.

A: The Saramonic SR-UM10-M1 Omnidirectional Lavalier Microphone with Locking 3.5mm Plug (B&H # SASRUM10M1) is a replacement for the original microphone that is included with the Saramonic UwMic9 2-Person Camera-Mount Wireless Omni Lavalier Microphone System. You can also use the Rode RODELink Lav Omnidirectional Lavalier Microphone for RODELink Systems (B&H # ROLINKLAV), the Senal OLM-2 Lavalier Microphone with 3.5mm Locking Connector for Sennheiser EW & Senal AWS-2000 Series (B&H # SEOLM2), or the Sennheiser ME 2-II Omnidirectional Lavalier Microphone with Locking 3.5mm Connector (B&H # SEME2II). Any of the lavalier microphones with a locking 3.5mm TRS male connector that are wired for compatibility with Sennheiser transmitters can also be used with the Saramonic TX9 Digital UHF Wireless Bodypack Transmitter.

Q: 9. What type of removable antenna is used? where can you get replacements?

A: These Saramonic UWMIC9S KIT2 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (514 to 596 MHz) are 1/4 wave antennas with a screw type connector.

Q: 10. Dose the Sanken Cos-11D lav work with the Saraminic UWMIC9 TX9 transmitter ?

A: Yes, you can use a Sanken COS-11D lavalier with the Saramonic UWMIC9 TX9 transmitter, but only if it has a 3.5mm locking connector and a compatible internal wiring configuration. B&H item # SAC11WNSOTRB is a COS-11D with a 3.5mm locking connector that is wired for use with Sony UWP transmitters, and it will also work with a Saramonic UWMIC9 TX9 because the internal wiring configuration and the connector are the same for both Saramonic and Sony.