The tan Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and TA4F Connector for HME Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to HME TX550 and TX822 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits HME Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this case acomodare my SonyA7 IV with a 28-70 Tamron lens, and a sony 85mm prime lens, plus extra battery ?

A: The Sony a7 IV Mirrorless Camera with the Tamron 28-75mm f/2.8 Di III VXD G2 Lens (Sony E), Sony FE 85mm f/1.8 Lens, and extra battery will fit in the Pelican Vault V200 Medium Case with Lid Foam and Dividers (Black).

Q: 2. It is weather resistant but not waterproof ?

A: Yes, this case is weather resistant, not fully waterproof.

Q: 3. Is the foam cubed, one solid block of foam, or several layers of solid foam?

A: The Pelican Vault V200 Medium Case with Foam Insert has three layers. The 1st Base Layer is1.59". The 2nd Base Layer is 1.59". The 3rd Base Layer is 0.65".

Q: 4. can i fit a zhiyun weebill s?

A: This case is designed for a pistol and will be too small for the Weebill-S. Instead we recommend the Pelican 1500 Case with Foam (Yellow), BH #PE1500FY.

Q: 5. I have noticed that the clips that attach to the camera in the picture are the older version there is a newer one that has a safety thinking built in. Will the one I order be the latest version? And will you be getting in the large explorer lens pouches?

A: We are selling the newer version which has changed to a newer clasping mechanism as well as the new addition to a tether as well. Currently, we do not carry the Large Explorer Lens Pouches.

Q: 6. What are the interior dimensions of the case?

A: The Interior dimensions for the Pelican Vault V200 Medium Case with Lid Foam and Dividers (Black) are, 14 x 10 x 5.5" / 35.6 x 25.4 x 14 cm 1.57" / 3.99 cm (Lid Depth) 3.93" / 9.98 cm (Base Depth)

Q: 7. I want to purchase this unit. I want to place a Canon G7X in the unit in landscape mode (horizontal), I have a case protecting the camera. I would also be putting another PELICAN case into the unit (LUME CUBE with its accessories.) I would also have some cleaning supplies and a hurricane dust blower also within the case. Is this unit too small to keep everything safe and not "pressed" into the case?. Please advise. Thanks.

A: Without knowing the exact measurements or models of the items you have mentioned, it would be hard to give you an accurate answer. However, the Vault V200 should technically fit everything you have specified as long as the other cases you are using are not significantly larger that the items you're protecting.

Q: 8. Can I store Nikon z6ii plus z lens 24-120mm, 14-30mm, and 105mm. SB500 flash?

A: That combination might be tight in the Pelican Vault V200 Medium Case with Lid Foam and Dividers. I would recommend you to place the items on a table as they would go in the case and measure length, width, and height. Then compare to the internal size of the case which is 14 x 10 x 5.5".

Q: 9. This case shows orange dividers for the interior. Does the case have orange or black dividers or simply black plastic dividers with no inserts?

A: The case either comes with orange dividers as pictured or a black foam insert.

Q: 10. Will this case fit a Fuji XT3 with battery grip attached- standing upright inside the case?

A: If one would put the Fuji XT-3 body with a grip attached upright in the Pelican Vault V200 Medium Case with Lid Foam and Dividers, it would only fit if it was able to dig into the foam cover.