The light beige Countryman E6 Directional Earset Mic, Medium Gain with Detachable 2mm Cable and TA4F Connector for Lightspeed Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Lightspeed BP-700 and BP-800 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lightspeed Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. WiIl it fit Nikon 160-600 lens?

A: The overall compartment internal dimensions on the Manfrotto Pro Light Backloader 22.5L Camera Backpack (Medium) are 16.9 x 10.6 x 6.3". The Nikon NIKKOR Z 180-600mm f/5.6-6.3 VR Lens (Nikon Z) with lens hood on reverse is 12.4 x 5.5"; therefore, you will get enough space to fit the lens attached to a camera body.

Q: 2. The Canon EOS R5 C is listed as a compatible camera. Does this adapter supply the correct current and voltage to enable the use of the recording modes requiring a power source other than the standard Canon LP-E6NH battery (e.g. 8K RAW at 60p)?

A: The Anton Bauer Regulated P-Tap to LP-E6 Dummy Battery Cable (20") (B&H# ANPCRDLEB) is indeed for any current (as of April 2022) camera that accepts the Canon LP-E6, LP-E6N, or LP-E6NH battery for power. That includes the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C). However, as you have noted, the R5 C requires an additional power in order to shoot video in some modes. That electricity (which must be high power and typically PD-compliant) must be provided through the USB C port. Since this cable connects to the battery chamber (rather than to the USB C port) it will not provide any power there at all and therefore cannot enable high power shooting modes.

Q: 3. can i use this to power my blckmagic micro cinema camera?

A: You should be able to use this D-tap cable to connect and power your BMD Micro Cinema Camera from a battery with a D-Tap port. This cable has a Canon LP-E6 style dummy battery, which is the kind of battery the Micro Cinema Camera uses.

Q: 4. What is the output voltage of this adapter ? My 5DM3 can only take 8.0V DC instead of the 9.0V DC of the R5 mentioned in another question.

A: The output voltage is 8V as per the manufacturer.

Q: 5. Is the voltage regulator located within the dummy battery, or as an in-line cable regulator?

A: This is not listed as a regulated adapter. For a regulated option we suggest the IndiPRO Tools D-Tap to LP-E6 Dummy Battery Cable (30"), B&H # INPTLPD. https://bhpho.to/34wv4Nc

Q: 6. Any issues with the canon r5?

A: According to GyroVu, the USB to Canon LP-E6 intelligent dummy battery does not have compatibility issues with the Canon EOS R5/R6 cameras.

Q: 7. Does this work with Canon Mark IV

A: Yes it should. The 5D Mark IV uses the LP-E6 battery system, which is the kind of dummy battery this cable has.

Q: 8. I purchased this adapter to power my Canon 7D for astrophotography. I use a Jackery Battery with a USB-A (5v, 2.4 a) port. My camera will not even turn on with this power. I then powered up my ASIAIR Plus which draws 12 volts and provides more amperage to its USB ports. The camera will turn on but recycles when I try to take an image and does not save the image to the card. The ASIAIR also has usb3 ports can I use one of these to get more power?

A: Although this product is mainly used with a USB to AC plug adapter when connected to an AC outlet, the manufacturer recommends the GyroVu High Capacity 30,000mAh Power Bank, BH# GYGVPB301. https://bhpho.to/3pOgFJV

Q: 9. Can I use this hooked up to an anker power bank to power up the blackmagic 4k?

A: This model with work with any power bank. But depending on the device you will be powering with LP-E6 it might require certain power output. Low current output power banks will not have enough current to power some cameras or monitors. We recommend to use power bank which will have at least 2A output.Similar to our GyroVu model #GV-PB-301. https://www.bhphotovideo.com/c/product/1551207-REG/gyrovu_gv_pb_301_high_power_30_000_mah.html

Q: 10. Will this also power a 5D or 7D?

A: Yes