You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Medium Gain With Detachable 1mm Cable And Ta4f Connector For Anchor Audio Wireless Transmitters (tan)

Countryman E6 Directional Earset Mic, Medium Gain With Detachable 1mm Cable And Ta4f Connector For Anchor Audio Wireless Transmitters (tan)
  • Product Code: ga77450
  • Availability: In Stock

$1,949.85 $2,905.28

The tan Countryman E6 Directional Earset Mic, Medium Gain with Detachable 1mm Cable and TA4F Connector for Anchor Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersAnchor Audio: WB-6000, WB-6400, WB-8000
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB (A-Weighted)
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAnchor Audio: WB-6000, WB-6400, WB-8000
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB (A-Weighted)
Sensitivity1.9 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. The description says cubed / diced foam. The one I bought is solid. Is the description wrong?

A: Unfortunately that is an error on our website, it is a solid piece of foam that it comes with, not cubed/diced.

Q: 2. What are the interior dimensions of the case?

A: The Interior dimensions for the Pelican Vault V200 Medium Case with Lid Foam and Dividers (Black) are, 14 x 10 x 5.5" / 35.6 x 25.4 x 14 cm 1.57" / 3.99 cm (Lid Depth) 3.93" / 9.98 cm (Base Depth)

Q: 3. Will this fit Atomos Ninja Cast with Ninja V?

A: Yes, Atomos Ninja V 5" HDMI Recording Monitor with AtomX CAST Switcher Bundle fits inside Pelican Vault V200 Medium Case with Lid Foam and Dividers (Black) The Atomos ninja V with Cast dimensions are 6.3 x 5.1 x 3.2". You can re arrange the dividers inside the case. The interrior dimensions of the insert are 14 x 10 x 5.5".

Q: 4. Will this case accept padlocks (adjacent the latches) to secure the case?

A: Yes this case is capable of accepting a pad lock.

Q: 5. will this fit my Sony a7iii with battery grip, my Sony 70-200GM, sigma 24-70, and Godox V1?

A: No, the case is too small for that equipment. The camera with the grip is about 5.8 inches tall. So it would need to be in the case with out a lens attached and flat.

Q: 6. Will a Canon EF 100-400mm f/4.5-5.6L IS II USM Lens with the lens hood attached in the storage position fit in the V200 case w/Dividers given the 5.5" interior dimension?

A: Yes a Canon EF 100-400mm II lens along with its hood in reverse can fit across the width of this case.

Q: 7. Can fit full set star adventurer mount?

A: This case is large enough to fit the Sky-Watcher Star Adventurer Motorized Mount Astro Package.

Q: 8. It is weather resistant but not waterproof ?

A: Yes, this case is weather resistant, not fully waterproof.

Q: 9. Is the foam cubed, one solid block of foam, or several layers of solid foam?

A: The Pelican Vault V200 Medium Case with Foam Insert has three layers. The 1st Base Layer is1.59". The 2nd Base Layer is 1.59". The 3rd Base Layer is 0.65".

Q: 10. Is there any way to buy just the divider kit if you already own the case?

A: I'm sorry but we do not sell that particular divider set. You will have to contact Pelican at; PelicanTel: 310-326-4700 or 800-473-5422 Website http://www.pelican.com/ Email sales@pelican.com

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Acebil T750m Tripod System

$1,155.00 $1,813.35

Raise 3d Pro2 Air Filter

$179.97 $228.56

Bogen Dft-120 Digital Paging Feedback Terminator

$3,167.85 $4,846.81

Products You May Like

Leica Usb 3.0 Micro Type B Cable (9.8')

$198.00 $245.52

Henry Engineering Wall Mount Brackets

$60.00 $92.40

Slr Magic Anamorphot-50 1.33x Anamorphic Adapter

$1,047.00 $1,539.09

Pelican 1607 Air Padded Divider Set

$583.23 $909.84