The cocoa Countryman E6i Directional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the ShutterBos II Remote Switch work with the Nikon D80 camera?

A: I think it will if you have the right connection cable. It works for both my sony and canon cameras just fine.

Q: 2. Would this work well for connecting a Zoom F6 to a LECTROSONICS DCHT DIGITAL CAMERA HOP TRANSMITTER via the Zoom F6's line out port?

A: No. The Timecode Systems LEMO 5-Pin to 90 Degree 3.5mm Mini Jack Cable for DSLR Camera is not compatible for use with the Lectrosonics DCHT transmitter. The DCHT transmitter has a TA6F (XLR 6-pin female) locking input connector, not LEMO 5-pin.

Q: 3. Is it possible to control auto focus points with this remote directional pad?

A: No. The pad is only for navigating the remote.

Q: 4. Will 4 pin fit into dvi port on Sony handycam dvr350?

A: No, the Firewire 4 pin port would not fit into a dvi port. But the Sony handycam TRV350 would not have a DVI port, it would have the Firewire port So this would work with this camera.

Q: 5. Would this cable work to send timecode FROM my Sound Devices 633 to a time code box? Like Deity TC-1? I have a cable that works in the opposite direction...

A: Yes, the Timecode Systems TCB-43 5-Pin LEMO to 90º 3.5mm Mini Jack for DSLR Camera will send timecode from the Sound Devices 633 Digital Recorder into a 3.5mm TRS input on a camera, recorder, or the Deity Microphones TC-1 Timecode Generator Box. As another option, you can also use the Tentacle Sync 5-Pin LEMO to Tentacle TC-Jamming Cable -16" (B&H # TEC03) which is intended for this purpose and even has an arrow near the 3.5mm connector to show the direction of the timecode signal flow.

Q: 6. which cable do i require for Nikon D810?

A: The Vello ShutterBoss II Timer Remote Switch is a cable release that has a built-in cable. As such, you would have to purchase the appropriate model for your needs, as the cables are not interchangeable. The Vello ShutterBoss II Timer Remote Switch for Nikon with 10-Pin Connection, B&H # VERCN12, would be the correct remote release for use with the Nikon D810 DSLR camera. If you instead own the Vello Wireless ShutterBoss Timer Remote (which does use a detachable cable - available separately), then the Vello 2.5mm Remote Shutter Release Cable for Nikon 10-Pin Cameras, B&H # VERCCN125, would be the correct replacement cable that would work for your needs.

Q: 7. Would this device work with Fujifilm X-E2, X-T1 and X-T2? I appreciate all answers. Thank you.

A: One of the three cables included in the above kit would be compatible for use with the three cameras you list above (the other cables are only compatible for use with Nikon DSLR cameras).

Q: 8. Hi! Will this Pearstone FireWire 4-6 pin cable work with a Panasonic PV-GS320? Tried another brand and 4pin side is too big, won't fit.

A: Yes, the Panasonic PV-GS320 3 CCD Mini DV Camcorder, 10x Optical Zoom, 3.1 Megapixel Pictures, Color Viewfinder, 2.7" LCD Screen, SD/HC Memory Card Slot is compatible with the Pearstone FireWire 400 4-Pin to 6-Pin Cable - 3' (0.9 m) so long as the host computer contains the 6 pin connection,

Q: 9. Would this be good for outdoor use?

A: No, the Sennheiser RG9913 Low-Loss Flexible RF Antenna Cable 50' is not recommended or rated for outdoor use.

Q: 10. Will this work with any 4 pin lemo device? Looking to power a Battery Bud II for power distro.

A: This is designed for the Canon C70 and while it could be used with other devices we can only say it would work with the C70s Barrel (11.5 to 20 VDC) Input.