You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Medium Gain With Detachable 1mm Cable And Ta4f Connector For Hme Wireless Transmitters (tan)

Countryman E6 Directional Earset Mic, Medium Gain With Detachable 1mm Cable And Ta4f Connector For Hme Wireless Transmitters (tan)
  • Product Code: ga77671
  • Availability: In Stock

$1,949.85 $2,944.27

The tan Countryman E6 Directional Earset Mic, Medium Gain with Detachable 1mm Cable and TA4F Connector for HME Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to HME TX550 and TX822 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits HME Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersHME: TX550, TX822
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB (A-Weighted)
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersHME: TX550, TX822
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB (A-Weighted)
Sensitivity1.9 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this fit sonya7iii with 85mm lens or would I have to take off lens?

A: The Sony a7 III Mirrorless Camera with the Sony FE 85mm f/1.4 GM Lens attached will fit in the Pelican Vault V200 Medium Case with Lid Foam and Dividers (Black).

Q: 2. Is the foam cubed, one solid block of foam, or several layers of solid foam?

A: The Pelican Vault V200 Medium Case with Foam Insert has three layers. The 1st Base Layer is1.59". The 2nd Base Layer is 1.59". The 3rd Base Layer is 0.65".

Q: 3. It states weather resistant. Are these cases Air tight?

A: Yes this cases are air tight.

Q: 4. What are the interior dimensions of the case?

A: The Interior dimensions for the Pelican Vault V200 Medium Case with Lid Foam and Dividers (Black) are, 14 x 10 x 5.5" / 35.6 x 25.4 x 14 cm 1.57" / 3.99 cm (Lid Depth) 3.93" / 9.98 cm (Base Depth)

Q: 5. Will this case accept padlocks (adjacent the latches) to secure the case?

A: Yes this case is capable of accepting a pad lock.

Q: 6. This question is about the V200. I need to carry a Nikon D7200 body and a Nikon 200-500 lens will the lens fit in this case?

A: Yes, the Pelican Vault V200 Medium Case with Foam Insert can accommodate the Nikon D7500 DSLR with the Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR Lens attached.

Q: 7. will this fit my Sony a7iii with battery grip, my Sony 70-200GM, sigma 24-70, and Godox V1?

A: No, the case is too small for that equipment. The camera with the grip is about 5.8 inches tall. So it would need to be in the case with out a lens attached and flat.

Q: 8. It is weather resistant but not waterproof ?

A: Yes, this case is weather resistant, not fully waterproof.

Q: 9. Will this case acomodare my SonyA7 IV with a 28-70 Tamron lens, and a sony 85mm prime lens, plus extra battery ?

A: The Sony a7 IV Mirrorless Camera with the Tamron 28-75mm f/2.8 Di III VXD G2 Lens (Sony E), Sony FE 85mm f/1.8 Lens, and extra battery will fit in the Pelican Vault V200 Medium Case with Lid Foam and Dividers (Black).

Q: 10. I wish to place a CANON G7X into this unit in the landscape ( horizontal ) position. The camera is in a fitted camera case, I would also place a Lowepro Viewpoint CS 40 case into the Pelican as well.Additionally, I would have a cleaning kit made by Zeiss ( rag and liquid)in it's plastic holder. Finally, I would have a Gittos small rocket blower in the case as well. Would all this fit without it all be "pressed" in? I live in Canada and to return the case if it does not fit, would be very difficult. Can you help me? Thanks.

A: Yes you may fit all of the listed items into the Vault V200.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Pocketwizard Fmpc Cable Adapter

$51.00 $80.07

Products You May Like

Haida Nanopro Mc Clear Filter (105mm)

$357.00 $449.82

Roland Fantom-7 76-note Workstation Keyboard

$9,578.97 $13,793.72

Lenovo Thinkstation P7 Tower Workstation

$14,983.50 $19,178.88

Pgytech Action Camera Adhesive Mount

$119.85 $185.77

Tiffen 127mm Gold Diffusion/fx 1 Filter

$2,129.85 $3,386.46