The cocoa Countryman E6i Directional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. How do you a wireless shutter release and wireless strobe release together?

A: Most wireless shutter releases that can also set off strobes cannot do it at the same time.The Vello Wireless ShutterBoss is only a remote shutter. You will need wireless sync device to add to the camera and your strobe. Best for this question, is for you come to come into chat so we can discuss what will work best for the equipment you have.

Q: 2. which cable do i require for Nikon D810?

A: The Vello ShutterBoss II Timer Remote Switch is a cable release that has a built-in cable. As such, you would have to purchase the appropriate model for your needs, as the cables are not interchangeable. The Vello ShutterBoss II Timer Remote Switch for Nikon with 10-Pin Connection, B&H # VERCN12, would be the correct remote release for use with the Nikon D810 DSLR camera. If you instead own the Vello Wireless ShutterBoss Timer Remote (which does use a detachable cable - available separately), then the Vello 2.5mm Remote Shutter Release Cable for Nikon 10-Pin Cameras, B&H # VERCCN125, would be the correct replacement cable that would work for your needs.

Q: 3. Is it possible to control auto focus points with this remote directional pad?

A: No. The pad is only for navigating the remote.

Q: 4. Would this cable work to send timecode FROM my Sound Devices 633 to a time code box? Like Deity TC-1? I have a cable that works in the opposite direction...

A: Yes, the Timecode Systems TCB-43 5-Pin LEMO to 90º 3.5mm Mini Jack for DSLR Camera will send timecode from the Sound Devices 633 Digital Recorder into a 3.5mm TRS input on a camera, recorder, or the Deity Microphones TC-1 Timecode Generator Box. As another option, you can also use the Tentacle Sync 5-Pin LEMO to Tentacle TC-Jamming Cable -16" (B&H # TEC03) which is intended for this purpose and even has an arrow near the 3.5mm connector to show the direction of the timecode signal flow.

Q: 5. Would this work well for connecting a Zoom F6 to a LECTROSONICS DCHT DIGITAL CAMERA HOP TRANSMITTER via the Zoom F6's line out port?

A: No. The Timecode Systems LEMO 5-Pin to 90 Degree 3.5mm Mini Jack Cable for DSLR Camera is not compatible for use with the Lectrosonics DCHT transmitter. The DCHT transmitter has a TA6F (XLR 6-pin female) locking input connector, not LEMO 5-pin.

Q: 6. Are there any intervalometers for Sony with a minimum interval less than one second? My camera as well as this model have a one second minimum.

A: Unfortunately, the intervalometers we currently offer would have a minimum interval of 1 second.

Q: 7. Will this power my Lowell i light, replacing the dc lead battery?

A: This will be compatible to power the I Light through AC.

Q: 8. Will the ShutterBos II Remote Switch work with the Nikon D80 camera?

A: I think it will if you have the right connection cable. It works for both my sony and canon cameras just fine.

Q: 9. Will this power the DMW-YAGHPP external interface for the Panasonic GH4?

A: Not sure about that particular piece of gear. It's output is 12 volts if you need 14 this will not do. Check with Manual.

Q: 10. Will this unit work on my canon 1 DX Mark II?

A: Yes, the ShutterBoss II Timer Remote Switch is compatible with the Canon EOS-1D X Mark II DSLR Camera.