Usb Type C Female Connector For Cables

Neutrik Nc6fx-b 6-pole Female Cable Connector

Product Code: ga7800
Availability: In Stock

$26.31 $33.15

Qty

12 reviews Write a review

Description
Reviews (12)

Styled in black, the Neutrik NC6FemaleX-B is a 6-pole female connector for use in manufacturing your own cables. It offers an easy assembly, with only four parts and no screws. The connector provides a zinc die-cast shell, black metal housing, and gold contact. Chuck-type strain relief ensures secure clamping of cables, while a rubber gland in the boot provides protection against the stresses associated with bending. Furthermore, the NC6FX-B utilizes UL-recognized parts.

Black Metal Housing Gold Contacts Easy Assemblage: 4 Parts, No Screws Zinc Die-Cast Shell Chuck-Type Strain Relief Rubber Gland on Boot UL-Recognized Components

Parameters
Connection Type	XLR
Gender	Female
Electrical	None
Capacitance	Between Contacts: <7 pF
Contact Resistance	<3 MOhms (inner)
Dielectric Strength	1.5 kVDC
Insulation Resistance	>2 GOhms (initial)
Rated Current Per Contact	7.5 A
Rated Voltage	50 V
Mechanical	None
Insertion Force	≤20 N
Withdrawal Force	≤20 N
Lifetime	>1000 mating cycles
Wire Size	1 mm² maximum 18 AWG maximum
Wiring	Solder contacts
Locking Device	Latch lock
Chassis Shape	D
Material	None
Contact Plating	0.2 µm Au hard alloy over 2 µm Ni
Contacts	Brass (CuZn39Pb3)
Insert	Polyamide (PA 6.6 30 % GR)
Locking Element	St3K32 (latch) / Ck 67 (spring)
Shell	Zinc die-cast (ZnAl4Cu1) Plating: Black chromium
Strain Relief	Polyacetal (POM)
Environmental
Approvals	UL
Flammability	UL 94 HB
Standard Compliance	IEC 61076-2-103
Protection Class	IP 40
Solderability	Complies with IEC 68-2-20
Temperature Range	-22 to 176°F / -30 to 80°C
Range	2.75 x 2.83" (70 to 72 mm)
Diameter	0.74" / 19 mm
Packaging Info
Package Weight	0.1 lb
Box Dimensions (LxWxH)	7 x 5 x 2"

Related Questions and Answers

Q: 1. Can this connect a microphone directly to a recorder? Such as, a Lewitt 140 air to a Sound Devices MixPre 3?

A: This could work for you, but that will probably put a lot of strain on the mic connectors. Using a longer cable, and mounting the mic on a stand, grip, or boom pole - will be a much better option.

Q: 2. I need to bring XLR audio directly into the Aja IO 4k (https://a href= http://www.bhphotovideo.com/c/product/1025891-REG/aja_io_4k_10_bit_4k_uhd_sd_i_o_tb_2.html target= _blank www.bhphotovideo.com/c/product/1025891-REG/aja_io_4k_10_bit_4k_uhd_sd_i_o_tb_2.html/a). Will this do the trick?I'm thinking I connect my condenser mic to a mixer where it gets phantom power, output with XLR cable to this adapter and plug this adapter directly into one of the SDI BNC connections on the IO 4k. Will that work? Thanks!

A: Sorry, but the AJA Io 4K I/O for Thunderbolt 2 B&H # AJIO4K has no analog audio input connectors, only analog outputs. In order that we may better assist you, please write us with further detail about what you want to do. provideo@bhphoto.com.

Q: 3. Does this product come in black?

A: No, Neutrik does not offer this adapter in black finish.

Q: 4. Does any other company make such an extender in black?

A: Unfortunately, we do not currently offer an option that is a 3-Pole XLR female to 3-Pole XLR male extension adapter in black.

Q: 5. Are these compatible with the phoenix connectors that LiteGear uses on its products?

A: In order to properly answer your question, please tell us what connectors you wish to use. provideo@bhphoto.com.

Q: 6. Will thes fit a Shure SCM810?

A: Yes, this is the right part.

Q: 7. Does this fit the Crest CKi series power amplifier?

A: The Crest CKi series uses barrier strip and 4-pin Phoenix connectors, so the Hosa Technology Phoenix 3-Pole Female Connector would not be a match.

Q: 8. Does Neutrik make female in-line 2-pole Neutrik connectors? This is obviously a male.

A: I hope this is what you are looking for: a href= http://www.bhphotovideo.com/c/product/838670-REG/neutrik_nl2mp_speakon_2_pole_male.html target= _blank http://www.bhphotovideo.com/c/product/838670-REG/neutrik_nl2mp_speakon_2_pole_male.html/a

Q: 9. B&H has Neutrik NC7FXB described as a 7-pole 3-pin connector. The photo shows a 3-pin connector. Is that correct? Or is it 7 pins?

A: That is correct, this is a 3-Pin Female XLR Connector. It has 7 contact points inside it, which is what 7-pole means.

Q: 10. How to connect a Phoenix 3 pole female, on one end, with an RCA male connector on the other end?

A: Easiest way is to take a RCA cable and cut one end off. Strip the ends and insert them into plus and negative ends on Phoenix. They are marked on the connector which is which. There will not be a ground, so make sure cable itself is under 18 feet.

southpaw	26/09/2024
Fast service, great product 5

D. Lee	12/09/2024
About 2 years ago I started replacing the 1/4 inch connectors on my speakers with speakons, which have much greater contact area and therefore more efficient power transfer. The process continues. 5

Wayne	22/08/2024
The other evening while stacking speakers we had a little mishap, a couple of the guys where placing a 3-way on top of a sub when someone slipped. The speaker which weighs about 100 pounds hit the rear of the racked amp behind the sub smashing the speakON that was plugged into the amp. As can be seen, the impact bent the steel rear panel of the amp outward, however neither the plug nor the jack it was plugged into where damaged. I removed the plug and opened it to make sure the impact didn't pull the cable out but it was retained so tightly by the plug the cable didn't move at all. Had something been damaged we would have had to swap out a amp and or cord, however because of the strength of the plug and connector that wasn't required saving a lot of time, when we had very little time to spare. Time is money and those connector more than paid for themselves at that moment. 5

Zarthrag, Engineering Knave	11/08/2024
This was a very high quality item. but the description is waaaaay off. THIS IS A 7-PIN XLR CONNECTOR! These are difficult to locate, but the only difference from the pic is the number of pins (I would have preferred a screw latch, but that's okay) the pins are part of an assembly that can be removed, and are each clearly labeled/numbered ON THE FRONT AND BACK - no room for error on which pin is which! Pins appear to be gold plated and are swept, making it very easy to solder and assemble. Absolutely worth it. 5

Joseph	27/07/2024
Great quality product, and fast delivery. I needed them for a job last weekend and they arrived in just a few days. Easy to install, worked great. 5

Morris	01/06/2024
Great price, quick shipping and good communication. Well done! 5

Ivan_ef	19/05/2024
Good cable clamp and stain relief, easy to solder 5

William	17/05/2024
This speaker connector is easy to solder and has sturdy construction with a large opening for the wire. 5

Li	12/05/2024
I always wonder why we need another type of speaker connector besides the common spade and banana ones. This is my first time to use speakON and now I know why. Given the low impedance (4 or 8 ohms) of speakers, any reduction of resistance of wires and connectors would help. As for build quality, Neutrik is always the best you can find. 5

Fireplug	02/05/2024
Professional accesories for the motion picture camera industry. I use Neutrik 4pin XLR connectors for all my power related projects. 5