The set of Proaim Apple Boxes includes four different-sized 12-ply cedar base wood boxes for various on-set uses. Use them to boost up the height of your talent, support or stabilize camera equipment, sit on during breaks, raise an interviewer to eye level with a subject, level dolly tracks, and make an impromptu desk, among other applications. You can also nail wall plates to them to hold low-angle lighting fixtures. These apple boxes are smooth and won't splinter or crack under pressure. They can be stacked in various combinations to achieve the desired height.

Cedar Base Wood Boxes for On-Set Uses    For Propping/Leveling/Standing/Sitting    Full, Half, Quarter & Pancake Sizes    Stackable

• Full: 20 x 12 x 8"

• Half: 20 x 12 x 4"

• Quarter: 20 x 12 x 2"

• Pancake: 20 x 12 x 1"

Related Questions and Answers

Q: 1. Can these be used for the Dana Dolly? At what height would be recommended?

A: Hi Matt. Normaly doing things under the camera is another department, another profession. But when you'll use it, you should use bar clamps if you want to add / stack the boxes. It can be a slippery business sometimes. Make sure that nothing can move sidewards by accident. Dirt, dampness can act like lubrication. The weight will never be a problem, the boxes can hold easily a magnum dolly carrying to person. Safety first, you should think and always have wooden wedges with you. Have educated and experienced crew members around you, if possible. You would need a lot of the big boxes to support your Dana dolly on both sides, wouldn't you? I personally would go to a meter hight with no problems, like I said, using clamps to make it solid. Instead think about using a ladder on both sides, or a kind of foldable platforms. I hope I could answer your question to your satisfaction. Good luck for all your shooting situations.

Q: 2. Will this arrive at my home within 4 business days?

A: That is a B&H question

Q: 3. Are there holes on both sides for lifting or only one side?

A: There are holes on both sides of the Kupo apple boxes.

Q: 4. Can it be used on its side, so that it is 12 high and 8 wide? In that orientation, it is the perfect size for a heavy-ish darkroom slot processor I need to keep off the floor with 12 of room to empty chems back into bottles.

A: It's pretty sturdy. I'm not sure it's a great choice though as on end it may not have a large enough base to defend against someone running into it. It's solid and can hold some weight though.

Q: 5. Could you sand off the logo? Who's the person who thought putting the logo on the side was a good ides?

A: It can certainly be sanded off. Our logo is on there to ensure that you are working with the best box in the industry, built to withstand the rigor of on-set abuse.

Q: 6. is there a comparable box w/o logo?

A: Matthews, Alan Gordon, Kupo they are all branded with their logos.

Q: 7. Can you tell me how the wood is finished? eg. natural (bare wood), polyurethane, varnish, etc. tks.

A: The Apple Boxes come unfinished. They are sanded smooth so you can leave as is, paint or in my case i used Linseed Oil.

Q: 8. Is the box open on the bottom? Wondering if it can also be used as a crate

A: This is a six-sided Apple Box. No openings other than the handle ports on both ends.

Q: 9. How much weight does it hold?

A: It can hold ip to 300 lb-i have tested it.No problem

Q: 10. Are these nesting boxes?

A: No.