Protect your investment with the orange and black Parachute with Sentinel Automatic Trigger for Inspire 1 from Fruity Chutes. This lightweight parachute system is engineered to allow for automatic deployment, providing your Inspire 1 with a nice gentle landing. Automatic deployment is handled via the Sentinel triggering system, which can detect a variety of drone failures in as little as 0.5 seconds. Parachutes are ejected via a high-energy compressed spring so you can take the system with you to any location. They can even be conveniently folded and packed by the user for multiple uses without requiring shipment to the manufacturer.

For DJI Inspire 1 Drones    Automatic Deployment    Take Anywhere, Spring-Based Ejection    Automatically Deploys in 0.5 Seconds    1000 lb Parachute Break Strength    Does Not Require Drone Power    Repack & Reload Yourself    Can Be Used Multiple Times    48" Iris Ultralight Parachute

If something goes extremely wrong during flight, the Sentinel triggering system is there to automatically step in and save the drone. The system can detect if the drone suddenly falls, rolls, or flips. Detection happens in as little as 0.5 seconds, which equates to roughly 6' of free fall. Typically, the chute will deploy before a pilot notices there's an issue. The Sentinel system has its own 500mAh battery, so the chute can be deployed even if the drone experiences a complete power failure. The battery provides up to six hours of continuous operation and can be charged via an optional USB cable. To help keep the battery fully charged, power is provided by the Skycat launcher's V3 trigger switch's 5V power supply.

A carbon fiber Skycat X48 launcher is used to eject the parachute by utilizing a high-energy compression spring. This allows the parachute to be ejected out and away from the drone quickly while having no regulatory or transportation limitations. The launcher operates via a fuse wire that can be replaced with the extra wire included. The fuse wire holds the ejection piston in place, and when it's time to eject, a servo signal is sent to put current through the wire to melt it. A dedicated 800mAh LiPo battery provides power for launch when needed.

The carbon fiber Skycat X48 launcher is mounted onto a baseplate with M3 bolts, and the unit attaches to the airframe with included hook-and-loop straps. There's a dedicated compartment that keeps launch electronics safe, and there's room for the fuse trigger and battery. The automatic triggering system mounts onto the back of the compartment for easy access to arming or disarming it. The added weight of the mount typically only impacts flight time by approximately two minutes.

Nearly everything you need to attach the parachute system to your drone is included. All you need to provide are simple tools. The parachute is designed to mount next to the battery to minimize its impact on flight. To help take the stress out of installation, online tutorials and other resources are available to walk you through the process.

This Fruity Chutes parachute does not rely on the drone to operate. The entirely self-contained system means it can protect your drone even in the event of power failure.

The Iris parachute weighs only 2.6 oz, yet it can provide a gentle landing to drones that weigh between 7 and 11 lb, allowing them to land at a rate of 15 feet per second. The parachute uses eight shroud lines that are each rated at a 200 lb break strength. The parachute bridle uses 1000 lb Spectra material, and the overall break strength of the chute is approximately 1000 lb of pull force.

There's no need to send your parachute back to the manufacturer after every deployment. The system is designed to let you refold, repack, and reload the parachute multiple times. A parachute rigger jig is included to help you quickly and easily fold the parachute properly.

Nearly everything you need to attach the parachute system to your drone is included. All you need to provide are simple tools. The parachute is designed to mount next to the battery to minimize its impact on flight. To help take the stress out of installation, online tutorials and other resources are available to walk you through the process.

Related Questions and Answers

Q: 1. can you fly the inspire 3 indoor, with no sight to the sky?

A: Yes, the DJI Inspire 3 Drone can be flown indoors.

Q: 2. Does a lens come with this kit?

A: No, the DJI Inspire 3 Drone does not include a lens.

Q: 3. are the armrest padded ?

A: The armrests for the COUGAR Armor One Gaming Chair (Black and Orange) are made of a padded material.

Q: 4. what are the dimensions of the chair?

A: Please see the specs page here: https://bhpho.to/390TxQj (scroll down for dimensions)

Q: 5. How does this mount to my 70-200 and 500mm lenses?

A: You would need RucPac 1/4" Screw Strap D-Ring in order to attach the strap to your lenses 1/4-20 threads.

Q: 6. Hi, what is the zenmuse x9 photo and video bit depth ?

A: The Zenmuse X9-8K Air Gimbal Camera has a Bit Depth of the following: Photo color depth:DNG:16 bit, JPEG:8 bit Cinema DNG:16bit encoding ProRes RAW:12bit encoding ProRes422HQ:10bit encoding H.264:10bit encoding Note: IN3 without H.265 encoding

Q: 7. can this be used left or right handed? (or shouldered) for those of us who must have it on the left side or right side depending on which hand is dominant???? thanks in advance

A: You can use this strap on either shoulder.

Q: 8. Is the underarm strap really of any benefit?

A: Yes it keeps the strap from rolling forward and backwards, but if it is not comfortable for the way you use your camera, you can remove it if need be.

Q: 9. Does RucPac have the 1/4-20 'D' ring to attach a heavy lens mount or does this need to come from another maker?

A: The RucPac Sentinel Camera Strap (Black) does include a 1/4"-20 D ring.

Q: 10. Coming from a Peak Design system, could this sling strap be fitted with AL-4 anchor link(s)?

A: You could remove the D rings and attach the Peak Design AL-4 anchor system, however, the release system on the RucPac Sentinel Camera Strap is just as secure as AL-4.