Keep your valuable equipment protected with this 4-year CarePAK PLUS Accidental Damage Protection from Canon. This plan is for Canon consumer and professional camcorders, excluding the Cinema line, purchased inside the USA with a purchase price between $4000 and $5499.99. It covers incidents of accidental damage, including drops, power surges, and spilling liquids, as well as wear and tear that occurs during regular use. You can acquire this service plan up to 90 days after buying your product, and it will be in effect for four years starting from the original purchase date of your camcorder.

For USA Gear Purchased within 90 Days    Covers Accidental Damage    Image Recovery for SD and CF Cards    Product is Repaired or Replaced    Priority Service & Free Two-Way Shipping    Transferable, No Deductible    Genuine Parts and USA-Based Support

Covers dropping, liquid and electrical damage, workmanship and material defects, and normal wear and tear

Equipment will be repaired or replaced by manufacturer with no deductible charged

Preferential service keeps downtime at a minimum

A prepaid shipping label will be sent to you upon request, and free return shipping is provided

Retrieve lost or corrupted images from your SD and CF cards

If you sell or gift your insured product, you can initiate a one-time transfer of the plan to the new owner

Only original parts and products are used, and support is done by trained technicians based in the USA

Related Questions and Answers

Q: 1. How many ink cartridges does this printer have? It says it's designed for posters and signage, but is it 8, 10, or 12 nozzles?

A: As per the manufacture the Canon imagePROGRAF GP-4000 has "Nozzles Total: 18,432 and All colors: 1,536 nozzles". This printer contains a total of 10 ink cartridges Matte Black, Photo Black, Cyan, Yellow, Gray, Red, Orange, Green, Violet, and Fluorescent Pink.

Q: 2. What is the NRR rating for each of the three filters and the full-block?

A: The Sennheiser SoundProtex Plus Noise Reduction Rating is 10 dB (low filter), 17 dB (mid filter), 20 dB (high filter) or 25 dB (Full-Block filter/SNR).

Q: 3. Will this work with a Canon XA-10 video camera?

A: From what I can see, your camera has and LANC remote port, and the tripod control has the 2.5 cable. I think there is an adapter available for it, but you'd need to ask B&H about that. I do like the tripod, so I would recommend it if you can make it work with your camera.

Q: 4. is the warranty international?

A: The warranty is USA only.

Q: 5. For artwork reproduction, how does this model compare to the Pro-4100?

A: The Canon Imageprograf GP-4000 Printer is designed for posters and signage, while the Canon imagePROGRAF Pro-4100 Printer is designed for fine art and photography. The main difference is 10-ink vs 12-ink system.

Q: 6. Does this tripod have a removable head to be used for sliders?

A: While the head on this tripod is removable, it has a very uncommon size of a 65mm ball. There will be no options that allow you to mount the head on to a slider I'm afraid. A better option would be to have a separate video head on the slider, or you could look in to a tripod like B&H #BEA2573FS4. The S4 head which comes with that tripod can be removed and from there you could put the slider on the tripod and the head on the slider.

Q: 7. What is Dante ?

A: Dante is an AV-over-IP solution/protocol.

Q: 8. Would putting 15lbs on top of this tripod be dangerous? I bought it for my URSA Mini as a featured accessory without checking the load capacity...

A: I do not have a camera of that weight. I have used an EOS 5 Canon camera and flash and lens but total weight of that is around 3.5 pounds. That being said, the tripod seems rock steady. Very happy with purchase.

Q: 9. Is the fluid head removable for a slider?

A: While the head is removable, the 65mm Bowl Design is not one that can be used on a slider. You would not be able to use this tripod in that way. The Benro S4 Tripod System would be a better option, B&H # BEA2573FS4. This has a leveling platform that will allow you to remove the Flat Base Head and put it on the slider. You would even be able to mount the slider on to the tripod directly.https://bhpho.to/2ejQKqo

Q: 10. I just got the tripod vt-4000 can this tripod be used for soloshots3

A: This tripod will hold the SOLOSHOT SOLOSHOT3 with no issue. On a windy day, we suggest hanging heavy objects on it the stabilize the tripod and the camera.