Pro Tools Recording Studio

Avid Pro Tools | Hdx Thunderbolt 3 Mtrx Studio Rackmount Bundle

Product Code: ga78497
Availability: In Stock

$32,997.00 $40,586.31

Qty

9 reviews Write a review

Description
Reviews (9)

If you work with Pro Tools HD or HDX systems, consider the Pro Tools | MTRX Studio from AVID as the centerpiece of your professional studio. With its bevy of analog and digital I/O, comprehensive routing capabilities, monitor outputs, and headphone outputs, the interface has you covered when it comes to recording, mixing, and monitoring in a pro audio context.

The unit has plenty of connections for other interfaces, as well as your favorite mic pres.

With two 32-channel DigiLink ports, the MTRX Studio is compatible with Pro Tools | HDX or Pro Tools | HD Native systems running Pro Tools | Ultimate or Pro Tools | HD 12 or later. You'll also find ADAT ports, as well as Ethernet for Dante connectivity. BNC connections for clocking and loop sync are also on hand.

On the analog side, you'll find two preamps for mic signals or instrument inputs. You'll see two 1/4" instrument inputs on the front panel, and two XLR inputs on the rear. You'll also note 16 I/O of analog connections over DB25 ports. Monitor straight from the device over two 1/4" outputs, and plug two pairs of headphones into the front panel outputs.

SPQ speaker calibration is built into the interface, so you can tune your room for any session format. Switch between monitoring setups for music and post-production, quickly and easily.

Conversion has been provided by Digital Audio Denmark, ensuring pristine detail for capture or monitoring. A software 512 x 512 matrix facilitates extensive routing possibilities, so you can create cue mixes, integrate outboard gear, and even send audio to multiple devices simultaneously. The unit only occupies 1 RU of space.

Take Pro Tools | HDX On the Go Pro Tools | MTRX Studio Interface HDX Thunderbolt 3 Rackmount Chassis Pro Tools | HDX PCIe Core Card Pro Tools | Ultimate Perpetual License Connect with Thunderbolt 3 HDX Hybrid DSP Acceleration Two DigiLink Mini Connectors 64 Channels of Dante, 512 x 512 Matrix Mix and Monitor Dolby Atmos

Key Specs
Channels of I/O	Analog: 18 Input / 18 Output ADAT: 16 Input / 16 Output Dante: 64 Input / 64 Output DigiLink: 64 Input / 64 Output
Maximum Sampling Rate	192 kHz / 24-Bit
Number of Microphone Inputs	No
Analog Audio I/O	2x XLR 3-Pin Balanced Mic Input 2x DB-25 25-Pin Balanced 8-Channel Input 2x 1/4" TS Line/Hi-Z Input 2x DB-25 25-Pin Unbalanced 8-Channel Output 2x 1/4" TRS Unbalanced Headphone Output 2x 1/4" TRS Balanced Monitor Output
Digital Audio I/O	2x TOSLINK Optical ADAT Input 2x TOSLINK Optical ADAT Output
Host Connection	2x DigiLink Mini
OS Compatibility	Windows macOS
Power Requirements	AC Input
Parameters
Channels of I/O	Analog: 18 Input / 18 Output ADAT: 16 Input / 16 Output Dante: 64 Input / 64 Output DigiLink: 64 Input / 64 Output
Built-In DSP	Yes
Maximum Sampling Rate	192 kHz / 24-Bit
Number of Microphone Inputs	No
Built-In Microphone	No
Connectivity
Analog Audio I/O	2x XLR 3-Pin Balanced Mic Input 2x DB-25 25-Pin Balanced 8-Channel Input 2x 1/4" TS Line/Hi-Z Input 2x DB-25 25-Pin Unbalanced 8-Channel Output 2x 1/4" TRS Unbalanced Headphone Output 2x 1/4" TRS Balanced Monitor Output
Digital Audio I/O	2x TOSLINK Optical ADAT Input 2x TOSLINK Optical ADAT Output
Host Connection	2x DigiLink Mini
Host Connection Protocol	Avid Proprietary
USB (Non-Host)	No
Sync I/O	1x BNC Word Clock Input 1x BNC Word Clock Output 1x BNC Loop Sync Input 1x BNC Loop Sync Output
Network I/O	2x etherCON/RJ45 Dante
MIDI I/O	No
Other I/O	1x 1/4" TRS Footswitch Input
Digital Audio
Sample Rates	Up to 192 kHz
Bit Depths	Up to 24-Bit
Sync Sources	Dante, Internal, Word Clock
Compatibility
OS Compatibility	Windows / macOS
OS Compatibility	Windows macOS
Power
Power Requirements	AC Input
Physical
Rackmount Size	1 RU
Packaging Info
Package Weight	8.5 lb
Box Dimensions (LxWxH)	22.1 x 15 x 4.2"

Comprehensive I/O, monitoring, and routing capabilities in an all-in-one audio interface
Route any input to any output
Ample analog and digital connectivity, including Dante, DigiLink, and ADAT
Connect your outboard gear, mics, speakers, and more
Clear, precise converters and preamps from Digital Audio Denmark
Ultralow latency monitoring when tracking and mixing with Pro Tools | HDX or HD Native
Built-in SPQ speaker processing technology to tune your room for any session format
Calibrate speakers and tune any size and shape room to ensure an accurate monitoring environment
Create monitor profiles and fold-downs to speed up your workflow
EUCON-enabled for maximum control and integration with Pro Tools | Ultimate and any Avid control surface
Greatly reduces manual tasks and physical patching, keeping you in your creative flow

Related Questions and Answers

Q: 1. Hello, this control surface it will work with my computer with Windows 10?

A: This unit is not out yet. When it does come out, Avid will have more information on what OS compatibility. Pro Tools is Windows 8 compatible. a href= http://avid.force.com/pkb/articles/en_US/Compatibility/Pro-Tools-Operating-System-Compatibility-Chart target= _blank http://avid.force.com/pkb/articles/en_US/Compatibility/Pro-Tools-Operating-System-Compatibility-Chart/a

Q: 2. Will a 10.5 iPad Pro work?

A: Yes. There is an adaptor listed on Avid Web page: https://www.avid.com/products/avid-dock/pro-tools-dock-10-5-ipad-adapter

Q: 3. Hi there.. if i decide to buy this rotolight aeos 2 what type of trigger i have to buy ?for Sony A99II or i do not need any trig

A: The Rotolight AEOS 2 Pro Traveler Bundle is hybrid lighting, and if you want to use it as a flash, you will need the Godox XProS TTL Wireless Flash Trigger for Sony Cameras or the Godox Xnano S Touchscreen TTL Wireless Flash Trigger for Sony. If you wish to use it as a continuous light, there is no need for a trigger.

Q: 4. Does this enclosure work for the M1 chip Mac mini?

A: Yes, this will work with the M1 chip.

Q: 5. Can this be used with Adobe Premiere CC? For jog/shuttle functions as well as audio mixing in the timeline and track/clip windows?

A: It is only compatible with Avid S3 or Artist Mix.

Q: 6. Would this unit fit in an SKB 6U shallow rack?

A: Yes, the Sonnet xMac Studio Pro 3U Rackmount Enclosure can fit in the SKB 6U Roto Shallow Rack Case, B&H # SK1SKBR6S.

Q: 7. Will this work with Davinci Resolve Fairlight 19?

A: The Focusrite Red 16Line 64 x 64 Thunderbolt 3 Audio Interface for Pro Tools | HD (BH # FORED16LINE) will should work well with Davinci Resolve Fairlight 19 as long as the interface can be seen by the computer as a USB input device.

Q: 8. Can you install a graphics card in to this enclosure? (a la eGPU?)

A: This is an enclosure for Apple Mac Mini computers. There are PCIe slots for additional expansion including GPUs (limited compatibility). Please look for proper external GPU chassis..

Q: 9. Est-il compatible avec le Mac Pro 2020. Peut-il être monté dans un mac Pro 2020?

A: This PCIe card is compatible with Mac Pro computers.

Q: 10. Can you mount a Blackmagic Design DeckLink Quad 2 8-Channel 3G-SDI Capture & Playback Card Blackmagic Design DeckLink Quad 2 8-Channel 3G-SDI Capture & Playback Card in this enclosure?

A: The Blackmagic Design DeckLink Quad 2 8-Channel 3G-SDI Capture & Playback Card would fit in the Sonnet xMac Mini Server Thunderbolt 3 Rackmount Enclosure. However, according to Sonnet, this configuration is "not recommended. These cards are supported, but the resolution and/or number of video streams may be limited."

Katelyn	25/09/2024
[This review was collected as part of a promotion.] Wow! All I can say is wow. This dock has made it SO much easier to do multiple things on my laptop at the same time. I can have so many things going on and plugged in while I’m streaming. Honestly, this piece of technology has changed the way I do things. 5

Megs8	02/09/2024
[This review was collected as part of a promotion.] It is a great dock station. It is easy to install and hookup for all electronics. We have been using this for about a month and had no problems at all. It fits nicely on our desk. I highly recommend!! 5

jj1194	01/09/2024
[This review was collected as part of a promotion.] This dock has a small profile but is extremely powerful. It is thunderbolt and USB c compatible and allows a quick connect to external monitors. This enables my mobile laptop to come home to a full desktop setup. Highly recommend! 5

msn608	13/08/2024
[This review was collected as part of a promotion.] I’d previously utilized an older dock that consistently experienced issues with connecting, disconnecting, then reconnecting, etc. This new dock has been a lifesaver - it’s extremely quick, easy to use, and has all the ports I need for my devices. Highly recommend! 5

queeneelizabethanne	23/07/2024
[This review was collected as part of a promotion.] If you are the kind of tech pro that I am, with three monitors, two separate audio outputs, and need ports for all your accessories, look no further than the Pro Thunderbolt 4 Dock. It will hold everything and power it all with a single cable. I am extremely impressed because, at the price point, I thought that the data transfer would suffer minimally, but it held strong. It even has an ethernet port and fast charging capabilities. I was quite pleased, and I find it to feel well made and sturdy as well. Excellent product! The screens on all three monitors were crisp and clear as well! Spot on Belkin! 5

RickandRoll	08/06/2024
[This review was collected as part of a promotion.] There are a bunch of connections you can make with this from a single thunderbolt cable. The dock is sturdy and I like that none of the cords are permanently attached to it. I had no issues passing HDMI and it's nice to have an Ethernet connection available when my laptop doesn't have one. Direct connection to a printer without fussing with wireless is great as well 5

Stoopy	04/06/2024
[This review was collected as part of a promotion.] Prior to Covid I have been a Corporate Professional that has been in the office full time. When I worked from home, just the laptop itself was sufficient based on how infrequent "home work" was for me. Fast forward to current day, my employer like many have gone to full time remote work. I had to beef up my home office to accommodate the luxuries I was used to in the office. Being able to use my 34" monitor with both my laptop and desktop was a must have for me. When I saw this Belkin Pro Thunderbolt 4 Dock available I just had to have it! After using it for some time I'm extremely happy with this dock and am not sure I could function without it! The 40gb/sec transfer speed is absolutely smokin fast when transferring files back and forth on my home network! The fact it has 2 HDMI ports is fantastic, never had this before on any previous dock. The power capability on this device is awesome as well. It powers my laptop, phone and Ipad all day long with no problems. For the robust capabilities with this Dock I'm most impressed at how slim and sleek this device is. It looks classy sitting on my desktop where with previous docks I made sure to hide due to their bulky and ugly appearance. Overall I would suggest you try this dock if you are in the market, you will NOT be disapointed!! 5

Springles	25/05/2024
[This review was collected as part of a promotion.] I have a Microsoft Surface and love it because of the portability of it. It's my work computer but I take it with me. But it only has 1 USB port and not too many other ports. I got the thunderbolt dock to be able to connect more USB devices and other things to my computer. It has a lot of ports including HDMI ports and others. It also charges my computer while also has a phone charger port. It's not light so I don't think it's great for portability but I am leaving it in my office and it's fantastic. Recommend this to all. 5

NN2109	17/05/2024
[This review was collected as part of a promotion.] Pro Thunderbolt 4 Dock is perfect for my office! It definitely keeps the work area clean and less busy! Keeps all the wires organized! Unit is sleek and compact. Does not take up much surface area. Easily fits with any decor. 5