Use the lightweight Cine 7 Touchscreen On-Camera Monitor with RED DSMC2 Control Kit from SmallHD to provide professional monitoring for your RED DSMC2 camera with a sharp 7" display suitable for indoor or outdoor use. The kit includes the Cine 7 monitor, an L-series battery mount, a sun hood, a screen protector, an 8GB SD card, and the RED DSMC2 camera control kit that includes software, cables, and a USB adapter.

The Cine 7 monitor supports up to UHD 4K HDMI output as well as various HD and SD formats via one full-size HDMI input, one HDMI output, one 3G-SDI input, and one 3G-SDI selectable input/output. The monitor also supports cross conversion from HDMI to SDI and from SDI to HDMI.

The RED control software loads onto the monitor and allows you to control RED camera functions via the RCP protocol such as run/stop, color and exposure controls, status, color temperature, video format, playback, shutter, menu control, and more, all via the Cine 7 touchscreen. The control cable, SDI cable, and USB-to-LEMO adapter allow the monitor to connect to the camera.

The Cine 7 features a bright 1800 cd/m², 322 ppi, 1920 x 1200 IPS LCD touchscreen with 3D LUT compatibility. Using the intuitive Swipe OS3, you can turn on and save pages of various monitoring tools and focusing aids with a finger tap. At the rear of the monitor, an L-series battery mount enables you to power the unit.

7" 1920 x 1200 Touchscreen Display    RED DSMC2 Control Kit, Control Cable    1800 cd/m², 10-Bit IPS LCD Panel    8GB SD Card, Sun Hood, Power Cable    L-Series Battery Plate, USB Adapter    Supports up to 1920 x 1080p60 Input    1 x HDMI Input, 1 x HDMI Output    1 x 3G-SDI Input, 1 x 3G-SDI Output    Waveform / RGB Parade / Vectorscope    Card Slot for Image Capture/LUTs/Upgrade

Daylight-viewable, 7" touchscreen on-camera monitor with 1800 cd/m² brightness

RED DSMC2 camera control kit includes control and power cables as well as the RED control software

RED software works with RCP protocol to control functions such as run/stop, color and exposure controls, status, color temperature, video format, playback, shutter, menu control, and more

Slim, lightweight design with 10-bit, touchscreen IPS LCD panel

Supports up to 1080p60 video via full-size HDMI and 3G-SDI inputs

HDMI-to-SDI and SDI-to-HDMI cross conversion is supported

Uses SmallHD Swipe OS3 to organize and save customized functions and settings pages

Power with an L-series battery plate

Four 1/4"-20 mounting points on top, left, right, and back

An 8GB SD card, screen protector, sun hood, and cleaning cloth are included

• Pixel zoom: 1.1 to 2x and 2 to 8x via swipe up/down, with pinch-zoom
• DSLR scale: Canon 5D Mk II and Canon 7D
• Custom scale: Underscan only
• Anamorphic de-squeeze: 0.75x, 1.33x, 1.5x, 2.0x, 2.5x
• Image flip: Auto and manual
• Image rotation: Auto and manual
• Color focus assist: Adjustable style and intensity
• Peaking: Adjustable intensity
• False color: Spectrum, ARRI-style, and customizable
• Dual zebra: Customizable
• Waveform: Luma and RGB, customizable with region of interest highlighting
• Vectorscope: Yes
• RGB parade: Customizable
• Histogram: Luma and RGB
• Image capture: With dedicated button and image gallery
• Custom LUTs: Load as looks on pages or as system-wide calibration via the settings menu
• LUT import: Via SD card or USB storage device
• Image overlay: Opacity slider and blink setting
• Audio meters: HDMI and SDI up to 8 channels

Related Questions and Answers

Q: 1. Is the included control cable in this kit (9 pin or 4 pin)?

A: It is a 5-Pin to 9-Pin LEMO-Type Control Cable.

Q: 2. What cable do you recommend to buy to give power? some D-tap? what connector do I have I don't know

A: This monitor has a 2 Pin Lemo Input for power. You can use the Teradek 2-Pin LEMO to P-Tap Cable (18") to power it from a source with a D-Tap port, BH #TEBIT118. https://bhpho.to/36ogt7N

Q: 3. The 'touch' focus on screen option that works with the Komodo on camera monitor and app, can that work with this monitor too?

A: The SmallHD Cine 7 Touchscreen On-Camera Monitor with RED KOMODO Control Kit is a wired connection that allows you to use the SmallHD Cine 7 for Touch screen control. It does not include a wireless app.

Q: 4. Does this kit include RED Komodo control and the required cables?

A: No it does not include the control for the RED Komodo. The link below is the kit you would need instead: https://www.bhphotovideo.com/c/product/1616857-REG/smallhd_mon_cine_7_komodo_cine_7_red_komodo.html?sts=pi&pim=Y

Q: 5. Cine 7 ARRI Kit , Does it include software ?

A: Yes, included in this bundle is the SmallHD Cine 7 Monitor Camera Control Kit for ARRI ALEXA Mini/Mini LF/AMIRA Cameras (SMSFWARRICNK), which, as is stated, "includes a software license that provides full control via CAP (Camera Access Protocol) over your camera"

Q: 6. Is bolt 1000 receiver compatible with Cine 7 500 TX?

A: Yes, the Cine 7 500 TX can be paired with the Bolt 1000.

Q: 7. does this have a horizon line overlay like their previous monitors? for steadicam usage

A: The SmallHD Cine 7 does have a Crosshatch tool that can put a number of horizontal and vertical lines from 2x2 to 9x9 grids. You could also use a custom aspect ratio overlay for this purpose. https://guide.smallhd.com/m/cine7

Q: 8. Can you control the ALEXA Mini LF?

A: Yes.

Q: 9. Will the RED controls work with a DSMC 1 cameras?

A: Unfortunately it will not. The control kit, BH #SMSFWREDCK, is only for DSMC2 Cameras. It does not work with DSMC 1 cameras.

Q: 10. Can a standard 14.8V V-mount battery power this monitor? I'm concerned because the specs list it has a draw if 6-16.8 VDC.

A: Yes, a 14.8v power source can be used on the SmallHD Cine 7 Touchscreen On-Camera Monitor (L-Series). The monitor accepts a voltage of 10V minimum to 34V maximum for the DC 2-pin Lemo in and 6.0V minimum to 16.8V max for the battery terminal. V mount battery plate is SmallHD Battery Plate for Smart 7-Series Monitors (V-Mount) BH #SMVMP702TC7. https://bhpho.to/3rmpnyC