The black Countryman E6 Directional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Sony Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can anyone confirm if this will work with the new Bolt 4K LT 750 transmitter?

A: The Bolt 750 4k LT will only work with Vmount plates like the following. Vmount Battery side - https://www.bhphotovideo.com/c/product/1507496-REG/teradek_11_0854_pro_battery_plate.html Vmount Camera side - https://www.bhphotovideo.com/c/product/1500409-REG/teradek_11_0855_bolt_4k_v_mount_battery.html

Q: 2. I have a Roku TLC TV that I would like to connect to the Sony SRS 3000 Bluetooth Speaker to my Roku TLC tv, would there be a latency problem with tv sound?

A: According to Sony, it is only recommended to connect the Sony SRS-RA3000 Wireless Speaker (Black), B&H # SOSRSRA3000B, wirelessly to a Sony TV. Connecting wirelessly to different TVs may result in latency issues. It is generally best to connect a speaker to a TV with a direct wired connection whenever possible.

Q: 3. Confirmation: is the Canon LP-E6 battery actually powering the device (i.e. monitor that requires L-Series batteries) through the Sony L-Series dummy adapter - that connects to the L-Series battery slot on the device?

A: Yes, Canon LP-E6 batteries transfer power from the IndiPRO Tools POWER POD Dual LP-E6 Universal Power System to the Sony L Series Dummy Battery Cable for compatible devices.

Q: 4. What are the power requirements? Does this support 100-240V input?

A: A Sony SRS-RA3000 speaker that is purchased in North America will only work in North America. If you purchase the Sony SRS-RA3000 from an authorized Sony retailer in a country outside of North America that uses a different voltage standard, it will be compatible with the voltage standard in that region.

Q: 5. can i plug this dtap into this splitter? B&H #CAC2617 ' MFR #C2617 and than the splitter into this BH #WO280300 MFR #280300 ?

A: The CAMVATE Straight D-Tap to Locking DC 2.5mm Right-Angle Cable (Black, 18.9") (B&H# CAC2637) can be plugged into the CAMVATE Male D-Tap to 3-Port Female D-Tap Splitter Hub (Red) (B&H# CAC2617), which can subsequently be plugged into the Wooden Camera Battery Slide for RED KOMODO Camera (V-Mount) (B&H# WO280300).

Q: 6. Confirmation: That LP-E6 batteries connected to power pod are actually powering a device the L-Series dummy adapter is connect to? In my case a monitor that supports only L-Series batteries.

A: Yes, LP-E6 batteries are needed to power the IndiPro Tools Power Pod for the L-series dummy battery to work.

Q: 7. Does it record stereo signal from the two microphones?

A: The Ulanzi J12 2-Person Wireless Microphone System will allow you to use both transmitters at the same time and the receiver will send the audio from both transmitters into a device through the USB-C connection. You can record the audio from both transmitters on the device that the receiver is connected to, such as an Android smartphone. The audio sent from the receiver is dual mono, which means that you will hear a combined signal with both microphones mixed together on the left and right (same audio on both sides),

Q: 8. chances of destroying this BH #BLVIDA125HRD MFR #HYPERD/AVIDA12/5HDR with that cable? or better to use regulated 12v to dtap? hm

A: The CAMVATE Straight D-Tap to Locking DC 2.5mm Right-Angle Cable (Black, 18.9") is fine to use with the Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor and the chances are low.

Q: 9. Would this cable work to power the Amaran 60x?

A: Yes, The CAMVATE Straight D-Tap to Locking DC 2.5mm Right-Angle Cable would work with the Amaran 60x's 2.5mm power input port.

Q: 10. What is the uncoiled length?

A: The CAMVATE Coiled D-Tap to Locking DC 2.5mm Right-Angle Cable (Black, 39.4"), will stretch (uncoiled) up to 39.4 inches.