You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Standard Gain With Detachable 1mm Cable And Ta4f Connector For Anchor Audio Wireless Transmitters (cocoa)

Countryman E6 Directional Earset Mic, Standard Gain With Detachable 1mm Cable And Ta4f Connector For Anchor Audio Wireless Transmitters (cocoa)
  • Product Code: ga78692
  • Availability: In Stock

$1,949.85 $3,061.26

The cocoa Countryman E6 Directional Earset Mic, Standard Gain with Detachable 1mm Cable and TA4F Connector for Anchor Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersAnchor Audio: WB-6000, WB-6400, WB-8000
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL125 dB (A-Weighted)
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAnchor Audio: WB-6000, WB-6400, WB-8000
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL125 dB (A-Weighted)
Sensitivity6.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorCocoa
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the Peak AL 4 anchors work with Canon m5?

A: Yes it will

Q: 2. How do use this attached to the screw for when you want to use your tripod?

A: You would have to remove this ,in order to attach the camera to the tripod

Q: 3. Would these work with a Leica strap that has permanent metal rings on the strap?

A: Yes. The following unit offers eyelets in order to attach via " o" rings.

Q: 4. Would this anchor block the battery compartment if used on Fujifilm x100V?

A: The tripod socket is right next to the battery door in that camera, unfortunately it will block the battery door when it is on.

Q: 5. The bottem of the connector strap opening for wider strap ? Like Nikon Z 800 mm /f6.3 lens will fit ? Thanks

A: The Peak Design AL-4 Anchor Links are compatible with the Nikon LN-3 strap for the Nikon NIKKOR Z 800mm f/6.3 VR S Lens.

Q: 6. This is supposed to be a plug and play device but it doesn't allow me to record any video on the iPhone XS. Is my phone too old?

A: Try launching the iPhone's Camera app first, without connecting the wireless receiver for the Comica Audio Vimo S MI 2-Person Wireless Microphone System to the phone. After the app is already running, then connect the wireless receiver. That may resolve the problem.

Q: 7. Are the anchors strong enough to carry a Z9 attached to a 400 F2.8 lens?

A: Each anchor can withstand over 200 lbs of force so it will easily support a large camera and lens such as the Nikon Z9 and the 400mm f2.8 lens.

Q: 8. Are these V3 or V4 anchors?

A: We are still working through some stock on our straps that have V3's. These Anchor Links still might come with V3's, and if you do, they can always be replaced through our Anchor Update Program here: a href= https://support.peakdesign.com/hc/en-us/articles/360000833866-2018-Anchor-Update target= _blank https://support.peakdesign.com/hc/en-us/articles/360000833866-2018-Anchor-Update/a

Q: 9. Does this have the same size as the Royer Labs RSM-SS251 ?

A: While we do not have any of these items in stock to be able to do a physical hands-on comparison, I can confirm that the Mojave Audio Replacement Shockmount for MA-1000 Mic and the Royer Labs RSM-SS251 Sling-Shock Shockmount both fit the Mojave Audio MA-1000 Signature Series Multi-Pattern Tube Microphone.

Q: 10. Does this work with the standard iPhone camera app?

A: Yes, the Saramonic SR-EA2D Audio Adapter with Lightning Connector will work with the iPhone camera app.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Sennheiser Ambeo Vr 3d Microphone

$3,285.00 $4,993.20

Profoto Clic Cto & Clic Color Effects Kit

$894.00 $1,224.78

Zoom Ms-60b Multistomp Bass Pedal

$389.97 $534.26