The cocoa Countryman E6 Directional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Amplivox Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. any replacement winscreen ?

A: No, there is no direct replacement windscreen available at this time for the Rode Interview GO Handheld Mic Adapter. The original foam windscreen is a custom size with a rectangular-shaped interior to fit over the transmitter and edge of the handle. The closest foam windscreen size would be a 1-5/8" round foam windscreen which you would need to customize yourself to make it fit. You might be able to customize something like the WindTech 900 Series Windscreen 1-5/8" Inside Diameter (B&H # WI900B), but you will need to add more foam to the inside to make it fit. Otherwise, for a direct replacement with the Rode logo, contact Rode and they should be able to help with a replacement. You can reach Rode by phone at 562-364-7400. Their US offices are based in California.

Q: 2. I purchased this adapter to power my Canon 7D for astrophotography. I use a Jackery Battery with a USB-A (5v, 2.4 a) port. My camera will not even turn on with this power. I then powered up my ASIAIR Plus which draws 12 volts and provides more amperage to its USB ports. The camera will turn on but recycles when I try to take an image and does not save the image to the card. The ASIAIR also has usb3 ports can I use one of these to get more power?

A: Although this product is mainly used with a USB to AC plug adapter when connected to an AC outlet, the manufacturer recommends the GyroVu High Capacity 30,000mAh Power Bank, BH# GYGVPB301. https://bhpho.to/3pOgFJV

Q: 3. Is it possible to adjust the torque settings for the motor?

A: User adjustment of the torque is not listed as a feature.

Q: 4. Can this be used to power an external monitor (smallhd 502 bright)?

A: Yes this should be able to power an external monitor such as the SmallHD 502. Just ensure that the power block/source you use has the proper voltage output to power your monitor.

Q: 5. Does this work with the Zacuto Gratical HD? I have another LP-E6 adapter that did not fit in the Gratical. I just want to make sure this one will %100 fit.

A: This is a third party solution and since we are not able to test it, the combination is unknown. For 100% fit, please procure this cable from Zacuto. Zacuto LP-E6 to D-Tap Power Cable B&H # ZAPTZACE6.

Q: 6. Can the battery in the controller be replaced?

A: The battery is internal and should only be replaced by a technician. Since the controller battery lasts 48 hours, you should be good for any work day. If it is not holding a charge well enough to get you through a production day, then it is time for the battery to be replaced.

Q: 7. Can this handle be attached to a mini tripod?

A: Yes, you can attach the Rode Interview GO handle to a mini tripod. A clothespin style mic clip like the On-Stage MY200 Clothespin-Style Plastic Mic Clip (B&H # ONMY200) can grip the handle. If the thread on the mini tripod is 1/4"-20, use a thread adapter like the CAMVATE 5/8"-27 Male to 1/4"-20 Female Microphone Screw Adapter (B&H # CAC1150) to accommodate the 5/8" thread on the mic clip.

Q: 8. Will the GyroVu usb to LP-E6 work with the Canon R5, assuming 3amp source?

A: Yes.

Q: 9. Does this work with the new RODE Wireless Pro?

A: Yes, the RODE Interview GO Handheld Mic Adapter for the Wireless GO is also compatible with the Wireless PRO and Wireless ME transmitters.

Q: 10. Will this also power a 5D or 7D?

A: Yes