The DJC-B1 from Pioneer is a semi-hard case designed to contain and protect DDJ-400 and DDJ-SB3 controllers for DJs and producers on tour and moving between gigs. It will safely house one device at a time. The Pioneer DJ logo is proudly adorned across the lid of the case.

The durable EVA Durashock molded body provides protection against scratches, dents, and dings. The dual convoluted foam-lined interior keeps your controller safe from knocks and bumps while on the go. Transporting the case is made easier with the included carrying handle and shoulder strap.

EVA Durashock Molded Body    Dual Convoluted Foam-Lined Interior    Dual Zippers    Carrying Handle    Shoulder Strap    Pioneer DJ Logo

• Pioneer DJ branded debossed logo
• Sleek reinforced stitched EVA-molded shell design 
• Embossed corner 
• Dual convoluted foamed-lined and padded interior 
• Optional foam sheets available for interior customization (sold separately) 
• Durable yet lightweight 
• Comfortable rivet-enforced double handles 
• Nonslip Pioneer DJ branded shoulder strap

Related Questions and Answers

Q: 1. Why does my Sony MDR 7506's headphone jack not fit into the XDJ RR's headphone input?  Both have 1/8" / 3.5 mm. Note: The Sony's 1/4 inch does fit.  The 1/8 inch does not.  The Sony's 1/8 inch jack is not insertable! The Sony is at least 10 years old; however, this should not matter.

A: It should fit; any 1/8 mini (3.5mm) jack (female) on the dj mixer would work with the 1/8" mini on the headphones. The newer Sony MDR 7506 headphones come with a removable adaptor (it is a 1/8" to 1/4" adaptor). This adaptor is also available at B&H, part #: PEAMPS3S or (better) RESONY18ADPT

Q: 2. Just bought this turntable. My question is: What is the sub weight for? I haven't attached it to the counterweight yet. Please explain in detail as the manual didn't do a great job. Thanks.

A: After installing the cartridge and headshell on the tonearm it will need to be balanced with the counterweight. With the tonearm off the rest about an inch or 2 over the platter you will need to adjust the counterweight until the arm is floating parallel with the platter. For most cartridges this should only take a few turns forward on the weight. For heavier cartridges, you will find that the counterweight is unable to balance your tonearm. You can offset the weight of a heavy cartridge by installing the sub-weight on the rear of the tonearm, and follow the balancing procedure again.

Q: 3. The FLX4 has "2 x USB." What does it mean?

A: The Pioneer DJ DDJ-FLX4 Portable 2-Channel rekordbox DJ and Serato Controller has two USB ports built-in. One is for the host connection from the DDJ-FLX4 to a computer or portable device like a smartphone or tablet, while the second USB port is dedicated for use to power the DDJ-FLX4 when using it with iOS and Android devices.

Q: 4. Will these fit the discontinued Pioneer HDJ-1000?

A: These Pioneer DJ Leather Earpads are not compatible with the HDJ-1000.

Q: 5. The DDJ 200 now includes a freebee. Question: How is it to be connected to the DDJ 200, being that the DDJ's ports are limited, if not non-existent? https://www.bhphotovideo.com/c/product/1458253-REG/colorkey_cku01_1050_twin_airship_effect_lighting.html

A: It would be used a as a stand alone piece of gear and not connected to the DDJ.

Q: 6. Will this wire work on Bose QuiteComfort 35 ii Headphones?

A: Yes, using the included 1/4" to 3.5mm screw-type adapter with the Pioneer DJ Coiled Cable for HRM-7, HRM-6 & HRM-5 Headphones (3.9'), the Bose QuietComfort 35 Series II Wireless Noise-Canceling Headphones (Black) will work.

Q: 7. Can you recommend a cartridge for this turntable?

A: For home use: The Shure M97XE is a highly sensitive turntable cartridge designed to produce audio with extreme accuracy and detail. The MX97E provides long term listening without ear fatigue by reproducing high frequencies and low passages with extreme accuracy and without distortion and noise. Shure M97XE High Accuracy, Low Mass Turntable Cartridge B&H # SHM97XE

Q: 8. Can I use this controller with my Rekordbox software on my laptop as well?

A: Yes, as long as your computer meets the system requirements, this will work with and machine that has Rekordbox. You will notice that the controller has two USB A ports. This would allow you to connect two computers at a time, so you can access music from either, or in a multi-DJ situation each DJ can have their laptop connected and ready to go.

Q: 9. Can a Pioneer Rev 7 fit in this console?

A: The Pioneer Rev 7 will fit inside this console, but it is much smaller than the intended size so it will not fit snugly into the podium.

Q: 10. Can you please verify dual voltage transformer 230c 50hz?

A: The external power supply included with the Pioneer DJ XDJ-RR All-In-One DJ System for rekordbox is designed specifically to operate at 120 VAC.