Reduce bounce and shake in your shots while distributing weight from your arms to your waist and back when using a Moza Air 2, DJI Ronin-S, DJI Ronin-SC, DJI RS 2, RS 3, RS 3 ProZhiyun CRANE 3/3S, or any single-handle gimbal with a 3/8"-16 or 1/4"-20 mounting thread using the THANOS-PRO Support Vest with Dual-Spring Arm from DigitalFoto. The support vest is fully adjustable to fit a wide range of body sizes. Combined with the arm, the vest system supports rigs that weigh 5.5 to 19.8 lb.

The dual-spring arm mounts on the front of the vest and features two adjustable joints for smooth movement in multiple directions. The gimbal installs using the arm's 3/8"-16 mounting screw, with the 1/4"-20 to 3/8"-16 adapter, or the CRANE 3/3S adapter mounts onto the mounting screw. The gimbal arm features two 1/4"-20 threads for additional accessories, such as a monitor mount.

Also included is a soft carry case with a shoulder strap for carrying the entire kit.

For Zhiyun, Moza, DJI Handheld Gimbals    Adjustable Support Vest    Adjustable Dual-Spring Tension Arm    5.5 to 19.8 lb Load Capacity    Reduces Shake and Bounce    Distributes Weight to Back and Waist    3/8"-16 Mounting Screw, 1/4"-20 Adapter    CRANE 3S Adapter Included    Carry Bag with Shoulder Strap Included

• Moza Air 2 handheld gimbal
• DJI Ronin-S handheld gimbal
• DJI Ronin-SC handheld gimbal
• Zhiyun CRANE 3 handheld gimbal
• Zhiyun CRANE 3S handheld gimbal
• Single-handle gimbals with 3/8"-16 or 1/4"-20 mounting thread

• Adjustable vest fits most body sizes
• 19.8 lb load capacity
• Reduces up-and-down motion bounce and shake
• Adjustable dual-spring arm with two joints
• 3/8"-16 gimbal mounting screw

Related Questions and Answers

Q: 1. How would I connect a monitor with the most convenient viewing for the filmer?

A: We highly suggest the following two solutions. Pearstone 11" Articulating Arm BH #PEAA83 • MFR #9041660 https://bhpho.to/37J7uo1 Pearstone Articulating Arm and Mini Clamp Kit BH #PEAA83K • MFR #AA-83K https://bhpho.to/3Kimw1j

Q: 2. Does this work with the Zhiyun-Tech CRANE 2S?

A: Yes, this should work fine with the Crane 2s.

Q: 3. Will it work with a Sony FS5 camera?

A: The DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm will work with the DJI RS2 or the Zhiyin 3S gimbals that would be able to support the Sony FS5 camera. Just add a gimbal.to support the camera. Models that would work are listed below. RS2 https://bhpho.to/3dhrvkJ 3S Pro https://bhpho.to/3xTFZAY

Q: 4. Can the Panasonic AG-DVX200 fit in this setup?

A: That depends on the gimbal that you attach to this set up. this product is designed to work in conjunction with smaller motorized stabilizers which do not work well with Camcorders like the DVX200. It is possible that it will work if you also get the Crane 3S Pro however we recommend mechanical stabilizer systems such as the Steadicam Aero Stabilizer with A-15 Arm, Vest, and 7" Monitor (No Battery Mount)

Q: 5. Will this work with the DJI RS4 Pro gimbal?

A: Yes, the DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for DJI RS 2, RS 3 & RS 3 Pro will also work with the DJI RS4 Pro Gimbal.

Q: 6. Can you easily (quickly) detach the gimbal from the vest between shoots to rest?

A: Yes, it will not be that difficult to break down.

Q: 7. is thia compatible with the zhiyun crane 3 lab?

A: Yes, this support vest is compatible with the following hand held gimbals. Moza Air 2, DJI Ronin-S, DJI Ronin-SC, Zhiyun CRANE 3S, or any single-handle gimbal with a 3/8"-16 or 1/4"-20 mounting thread

Q: 8. I just purchased this, after using it for a bit is there something I can purchase that can allow me to tilt the gimbal without having to tilt my body? I'm using the RS3.

A: The DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for DJI RS 2, RS 3 & RS 3 Pro, and Other Handheld Gimbals has no method to tilt the arm or post. With this system, tilt is to come from the gimbal, not the arm and post.

Q: 9. is it compatible with DJI Ronin RS2 Pro combo and Canon R5c?

A: Yes, the DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm still supports the following gimble models: DJI RS 2, RS 3 and, RS 3 Pro. Also, the Canon R5C can balance and be used with the DJI RS2 gimbal.

Q: 10. Will this work with the Ronin S

A: Yes, this is compatible with the Ronin-S.