The cocoa Countryman E6 Directional Earset Mic, Standard Gain with Detachable 1mm Cable and 1/4" Connector for Line 6 Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Dose this remote support for video? What I mean is can I use this for video recording while its on LiveView?

A: The way this can control video is if the specific camera you are using has a custom function to re-program the shutter button to start/stop video.

Q: 2. I'm interested in connecting a Sennheiser SK 100 G3 transmitter to a DJ's audio board. What is the difference between the Sennheiser CL 2, Sennheiser CM 1 and Sennheiser KA 600? Is it just the locking versus non-locking mini-stereo connector and length of each cable? Or are there important differences regarding signal quality?

A: The CM1 is designed for mics primarily with a DC voltage blocking capacitor to prevent damage to a microphone diaphragm. The CL2 is recommended for line level signal to the transmitter. The KA600 is designed specifically for the MKE 600 when connecting to a portable recorder or cameras high impedance input. Not designed for a wireless transmitter.

Q: 3. The Overview tab says The cable is specifically designed for connecting the evolution series portable EK transmitters to the professional audio outputs on microphones and line level devices. However, I believe EK should be replaced by SK since EK refers to the receivers not the transmitters?

A: Thanks for your input. It seems this may be a web error and has been forwarded to our web department for review.

Q: 4. Will this item convert a line level signal (from the line output of a mixer) to mic in level for video camera? I have an Si Expression 3 mixer and JVC GV-LS2 Live Streaming Camera.It is my desire to feed live mixed audio into the JVC camera for HD recording to SDXC. The internal mic of the JVC leaves much to be desired in my application. Video is great, just want to use processed audio into the MIC in of the JVC...Thanks in advance!Kevin

A: This cable features circuitry on both audio channels to match the sweet spot level of your camera's mic input. It attenuates the incoming microphone signal. The -25dB provided at the mic input is not sufficient to convert a LINE output signal to the mic signal required by your camera.

Q: 5. Will a Countryman B3 Lavalier Mic with and XLR plug (model B3P4FF05B) work with this adapter on a Sennheiser G2 transmitter??? thank you

A: I'm not sure. Whatever we bought works with our Sennheiser G1 just fine!

Q: 6. Can this be use on the Nikon D-810?

A: Yes, it works with Nikon 810 fine with no trouble.

Q: 7. does this cable allow a shure sm-58 to connect directly to an EW-100 body pack without any modifications ?

A: The CL-2 transmitter cable will allow for the connection of an SM-58 in addition to other dynamic, or self powered mics and line level devices.

Q: 8. does it work with Nikon d850?

A: Yes it is compatible with the D850 as well. It works with any Nikon camera that has the 10 pin remote connection.

Q: 9. Will this cabel work for zoom h4n??

A: This cable is compatible with the H4N as well.

Q: 10. Will this specifically work with a Canon 70D?

A: not sure ,IT not works on canon mark 2