The cocoa Countryman E6 Directional Earset Mic, Standard Gain with Detachable 1mm Cable and LEMO 3-Pin Connector for WisyCom Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. The Canon EOS R5 C is listed as a compatible camera. Does this adapter supply the correct current and voltage to enable the use of the recording modes requiring a power source other than the standard Canon LP-E6NH battery (e.g. 8K RAW at 60p)?

A: The Anton Bauer Regulated P-Tap to LP-E6 Dummy Battery Cable (20") (B&H# ANPCRDLEB) is indeed for any current (as of April 2022) camera that accepts the Canon LP-E6, LP-E6N, or LP-E6NH battery for power. That includes the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C). However, as you have noted, the R5 C requires an additional power in order to shoot video in some modes. That electricity (which must be high power and typically PD-compliant) must be provided through the USB C port. Since this cable connects to the battery chamber (rather than to the USB C port) it will not provide any power there at all and therefore cannot enable high power shooting modes.

Q: 2. which cable do i require for Nikon D810?

A: The Vello ShutterBoss II Timer Remote Switch is a cable release that has a built-in cable. As such, you would have to purchase the appropriate model for your needs, as the cables are not interchangeable. The Vello ShutterBoss II Timer Remote Switch for Nikon with 10-Pin Connection, B&H # VERCN12, would be the correct remote release for use with the Nikon D810 DSLR camera. If you instead own the Vello Wireless ShutterBoss Timer Remote (which does use a detachable cable - available separately), then the Vello 2.5mm Remote Shutter Release Cable for Nikon 10-Pin Cameras, B&H # VERCCN125, would be the correct replacement cable that would work for your needs.

Q: 3. How do you a wireless shutter release and wireless strobe release together?

A: Most wireless shutter releases that can also set off strobes cannot do it at the same time.The Vello Wireless ShutterBoss is only a remote shutter. You will need wireless sync device to add to the camera and your strobe. Best for this question, is for you come to come into chat so we can discuss what will work best for the equipment you have.

Q: 4. Which model for Pentax K3ii and K50?

A: The Pentax K3ii and K50 will work with a different model that has the Canon Sub Mini Connection. For those Pentax cameras you will need B&H #VERCC12 instead.

Q: 5. Would this cable work to send timecode FROM my Sound Devices 633 to a time code box? Like Deity TC-1? I have a cable that works in the opposite direction...

A: Yes, the Timecode Systems TCB-43 5-Pin LEMO to 90º 3.5mm Mini Jack for DSLR Camera will send timecode from the Sound Devices 633 Digital Recorder into a 3.5mm TRS input on a camera, recorder, or the Deity Microphones TC-1 Timecode Generator Box. As another option, you can also use the Tentacle Sync 5-Pin LEMO to Tentacle TC-Jamming Cable -16" (B&H # TEC03) which is intended for this purpose and even has an arrow near the 3.5mm connector to show the direction of the timecode signal flow.

Q: 6. Will this work with a bracketing setting and trigger the set of photos required ?

A: Yes if you have your camera set to bracketing, then fire it with this remote, you shall be able to capture a set of bracketed shots.

Q: 7. Will this power my Lowell i light, replacing the dc lead battery?

A: This will be compatible to power the I Light through AC.

Q: 8. Will the ShutterBos II Remote Switch work with the Nikon D80 camera?

A: I think it will if you have the right connection cable. It works for both my sony and canon cameras just fine.

Q: 9. Is it possible to control auto focus points with this remote directional pad?

A: No. The pad is only for navigating the remote.

Q: 10. Does this work with the Zacuto Gratical HD? I have another LP-E6 adapter that did not fit in the Gratical. I just want to make sure this one will %100 fit.

A: This is a third party solution and since we are not able to test it, the combination is unknown. For 100% fit, please procure this cable from Zacuto. Zacuto LP-E6 to D-Tap Power Cable B&H # ZAPTZACE6.