This white Framatic Metro Frame from MCS features a glass window size of 16 x 20" and a white paper mat opening of 11 x 14". Rather than being made from cut and joined lengths of pre-finished molding, the Metro frame features a 1/4" thick panel of MDF laser-cut into a frame without mitered corner joints. Wood molding is attached to the back, creating the space for backing and up to 5/16" of artwork. The frame is painted after assembly to create a clean, classic-looking frame.

MDF and Poplar Wood Composite    Seamless Construction: No Corner Joints    Easy-to-Use Pivot-Clip Back    Neutral pH White Core Mat

Related Questions and Answers

Q: 1. is it possible to build this Butterly in a 8x8, 12x12 or 12x20 version with the Tubes included in the kit?

A: Yes, with the 20x20 kit you can reduce the tubes and make it smaller frames.

Q: 2. What would be the best way to store these so they are out of the way but wont be damaged (especially the stand on the back)?

A: They can be stored on a shelf sitting upright so that the stand is facing towards you.

Q: 3. How to I determine the exposure time?

A: There are several ways to determine the correct exposure. Obviously using a light meter is a good start. It could be a basic hand held incident meter, reflected light meter or even an app on a smart phone. One can also use sunny 16 to determine an approximate exposure. I've also used a digital camera to do a test shot and figure up settings from there. Hope that helps.

Q: 4. What are the outside dimensions of this frame?

A: The Photographers' Formulary Select Contact Print Frame (11 x 14") has outside dimensions of 16x20 inches.

Q: 5. What is the rated Linear Feet per Minute (LFM) for this product?

A: Please contact Metrovac for such detailed info at; Tel: 800-822-1602 or 845-357-1640 Website http://www.metrovacworld.com/ Email info@metrovacworld.com

Q: 6. What does the download code look like? I tried several differrent looking codes from my email. Nothing worked. Thanks.

A: Please contact our: B&H Customer Service Team: Call: 800.221.5743 or 212.239.7765 Email : cs@bhphotovideo.com

Q: 7. Can this board be used with a Canon Imagraf 4100s?

A: No, the Canon imagePROGRAF Pro-4100S Printer does not have a straight paper path, and so is not able to print on the FUJIFILM Semi Gloss RC Board.

Q: 8. what type of material is this?

A: The MCS 27 x 40" Trendsetter Poster Frame (White) is made of plastic.

Q: 9. Do you icc profile for this media?

A: Yes, the ICC profiles for FUJIFILM 20 x 30" Semi-Gloss Resin-Coated Board (10 Sheets) for Epson SP 800 and 900 Series printers can be found at the following link: https://www.fujifilm.com/us/en/business/photofinishing/wide-format-Inkjet/rc-board-semi-gloss/support

Q: 10. What is the max load or weight that this arm can bear?

A: The Axler RECODO 11" Arm with 1/4"-20 to 3/8"-16 Anti-Twist Fitting is designed to work with up to 3lb payloads.