The Mitchell-Base Tilt Wedge from Proaim supports cameras and rigs weighing up to 220 pounds and features a tilt range of 0 to 105°. Use this plate to create Dutch angle, underslung, or low-angle shots with your cine or pro-video rig. You can also use the Tilt Wedge to keep your camera level when using a vertically angled slider.

Multiple angles are indexed on both sides of the plate, enabling you to create and repeat precisely angled positions. Mount the wedge plate base onto your tripod plate, slider carriage, or another support using the multiple 3/8" pass-through holes on the bottom. The Mitchell base top is compatible with both Mitchell-based tripod heads and Mitchell castle-nut heads.

Mitchell Base to Cheese Plate Base    For Dutch Angle, Underslung & Low Angles    Fits Mitchell Base or Castle Nut Head    220 lb Load Capacity, 0 to 105° Tilt    Locking Knob on Both Sides    Multiple 3/8" Pass-Through Holes    Commercial-Grade Aluminum

Related Questions and Answers

Q: 1. I'm trying to mount a castlenut to the bottom, but how the holes are shaped the screws fall right through. What can I do?

A: According to Proaim, for the Proaim Mitchell-Base Tilt Wedge, you can use a 3/8" countersunk head bolt.

Q: 2. can this work in a dana dolly?

A: NO this Will NOT work on a DANA dolly

Q: 3. It says it has a 44lb payload capacity, is this at 90 Degree tilt also? I'm looking to use this as an overhead rig with a RED Cine Package on a dana dolly.

A: the max load capacity reflects it;s max load capacity even at close to the 90 degree angle maximum extension, As with all thing of this nature I'd recommend you test it personally before committing you camera package to it on a shoot

Q: 4. Will this take a Vinten 70 Head?

A: This tripod has a Mitchell mount. The Vinten Vector 70 head has the Four-bolt flat Vinten mount. You will need this adapter to use that head with these legs: B&H# VI31033 (https://www.bhphotovideo.com/c/product/97041-REG/Vinten_3103_3_3103_3_Mitchell_4_Bolt_Flat.html/specs)

Q: 5. If placed over a hard surface or even screwed to a heavy table using the feet not the mitchel, can you use a heavy Cabrio pl zoom lens at 100 or even 120mm focal length and not get shaking video using a super 35 camera with no IS? Did anyone tested this at Proaim or anyone else? All YouTube reviews have no real samples of this, only short unimpressive shots mostly wide Angie shots

A: The Proaim Flyking Precision Camera Slider has a 154 pound payload and will handle the Fujinon Cabrio Lens with a Super35 Camera.

Q: 6. Would I be able to adapt a 100mm ball head by using this product? Proaim Mitchell Base to 100mm Bowl Adapter BH #PRBP30200 MFR #BP-302-00

A: Proaim Mitchell Base to 100mm Bowl Adapter can be used on the Proaim Heavy-Duty Mitchell Base Tripod Legs with Mid-Level & Ground Spreaders.

Q: 7. What plastic case works with this tripod?

A: The Nalpak TP-1440WH 14" Tuffpak Series Hard Tripod Case with Wheels (BH #NATP1440WH) would work well as a hard tripod case for transferring the Proaim Heavy-Duty Mitchell Base Tripod Legs with Mid-Level & Ground Spreaders (Silver).

Q: 8. Can the mid-level spreaders be removed?

A: Yes.

Q: 9. Can I use my 100mm bowl tripod head on this?

A: You cannot as this is a Mitchell Flat Base Tripod.

Q: 10. I understand this to accept a mitchell head on one end. Can the other end accept a 100mm half bowl mount? My sticks have provision for 100mm bowl, and I'd like to use this with my current setup.

A: There are no available100mm bowl to Mitchell adapters. The Proaim Mitchell-Base Tilt Wedge requires a Mitchell mount to meet its weight rating.