The cocoa Countryman E6 Directional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Azden Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with the Rode Wireless GO and Samsung Note 10+?

A: Yes, the Saramonic 3,5mm to USB-C cable can be used to connect the Rode Wireless GO system to the Samsung Note 10.

Q: 2. Could this be used between a Sennheiser g3 and a Samsung galaxy tab s5e?

A: No, the Senheiser has a different wiring on the output.

Q: 3. Does any smartphone (I have the Pixel 3a XL) would recognize a microphone signal being input through the USB terminal?

A: Yes, but it has to be a powered microphone, like a wireless receiver or AA powered mic. Plug-in powered mics will not work with this cable. You may have select external mic in your video or audio app, but most will recognize it as an external mic if you have it connected when you start the app.

Q: 4. Can this be used to connect an MP3 player audio out {1/8 plug) to an audio in?

A: No this will not work for that pupose.

Q: 5. Does this work with Canon Mark IV

A: Yes it should. The 5D Mark IV uses the LP-E6 battery system, which is the kind of dummy battery this cable has.

Q: 6. Can this be used with the Rode Wireless GO Compact Wireless Can this be used to connect the Rode Wireless Go Compact Wireless System to a Macbook Pro?

A: Absolutely.

Q: 7. Does it come with a lemo to P-Tap cable?

A: No, the Freakshow MSX2-L does not come with a lemo to P-tap cable.

Q: 8. will the 250p work with xlr to mini on GH5s if you select phantom mode on camera...and does it reduce battery life noticeably?

A: There is no way to send phantom power from a camera's mini-jack mic input, since it is an unbalanced connection. So the SGM-250P will not work if converted to mini-plug on any camera. For this you will need a microphone that is self-powered. Our SGM-250 model shotgun microphone can run off a AA battery and could be adapted to a mini input if desired. However, for better results, we'd recommend the SMX-15 microphone for unbalanced, mini-jack connections. The SMX-15 also has a built in gain booster circuit to help over come the noise that is usually inherent in the poorer quality mic preamps that are built into most mirrorless and DSLR cameras.

Q: 9. Any issues with the canon r5?

A: According to GyroVu, the USB to Canon LP-E6 intelligent dummy battery does not have compatibility issues with the Canon EOS R5/R6 cameras.

Q: 10. Will this DTap work for the portkeys PT5 II?

A: No, the PORTKEYS D-Tap to Locking 4-Pin Power Cable for BM5 Monitor would not support the PT5 display. We recommend using the following cable to power the Portkeys PT5 from a DTAP connector. Kondor Blue D-Tap To Sony L Series Dummy Battery NPF Cable BH #KODTAPSLBK