The Universal Balljoint Head Mount with 1/4"-20 Thread from LanParte is a small and lightweight ball head suitable for use with compact cameras, webcams, small LED lights, microphones, and other accessories that can attach to a standard 1/4"-20 threaded mount. The base has a female 1/4"-20 threaded socket, so the head can be mounted on a tripod leg set or camera rig.

The single-action control lever allows the ball to be repositioned to any angle up to a 90° vertical orientation and a full 360° panoramic rotation on the base.

Compact Ball Head    1/4"-20 Threaded Tip Mount    1/4"-20 Threaded Socket    Single Knob Function

Related Questions and Answers

Q: 1. Does it fit into my Arca-Swiss d4 Tripod Head with a Classic Knob Quick Release? As I would like to change it to fliplock

A: The original quick release clamps on Arca-Swiss heads such as the D4 are attached without the intent to be user-interchangeable. There are reports of damaged clamp-attachment screws from those that have tried removing the clamps. We recommend leaving the original clamp attached.

Q: 2. Can this advice install on RRS Ballhead?

A: Yes, it has a 1/4-20 or 3/8" threaded hole to attach.

Q: 3. Some similar product list bearing capacity, in pounds. How much weight can this item handle?

A: Payload support for the CAMVATE Universal Super Crab Clamp is 5.5lbs.

Q: 4. Which Arca-Swiss camera plate will fit this?

A: This clamp accepts both traditional/regular arca-swiss plates as well as slidefix plates. Regular arca-swiss slides into the top dovetail whereas slidefix sits on the bottom dovetail. I've linked a few plates below, but for the regular plate all brands that use the arca-swiss compatible dovetail will work as long as their safety screws don't interfere. Regular: https://www.bhphotovideo.com/c/product/116072-REG/Arca_Swiss_802209_Universal_Camera_Plate_1_4.html?sts=pi&pim=Y https://www.bhphotovideo.com/c/product/822279-REG/Sirui_BSRTY50_TY50_Arca_Type_Pro_Quick.html Slidefix: https://www.bhphotovideo.com/c/product/663115-REG/Arca_Swiss_802283_Slidefix_100_QR_Camera.html

Q: 5. What size thread does this have for attaching to a mic stand? The description here says 3/8" but the K&M website says it has a 5/8" thread. Which is it?

A: It is both as an adapter is included.

Q: 6. What is the max weight it can hold?

A: The max weight would depend more so on what head and what legs you you choose to mount this quick set device onto.

Q: 7. Hello, I have bought from your shop the Arca-Swiss Monoball Z1 sp with Quick Release (B&H # ARZ1 ).However I would like to change the release clamp that I have with the Arca-Swiss Quickset FlipLock Round Quick Release Clamp (B&H # ARQR6038FL). Is that possible? Many thanks

A: hii don't believe you can change only the clamp, it doesn't work the ska way i think, you probably have to change the whole quick release

Q: 8. Can I use this on my manfrotto befree tripod?

A: The Quickset Fliploc fits on the Arca Swiss P0 ball head. The P0 ball head fits on any standard tripod (minus the head). The ballhead on the befree would need to be removed to install the P0 + the Quickset FlipLock. Often the Arca Swiss P0 comes with the Quickset.

Q: 9. The height measured as 0.79 This is the size of black part only or with screw on top?

A: Igor,Yes, this is the size of the black plastic part only. The screw on top is not considered in the .79 measurement.

Q: 10. Can you tell me if the camera plate will snap into place on this clamp, or is it a slide-in like the big Manfrotto plates? Thanks.

A: First you have to open the plate up fully by turning the quickset level fully open, then you tilt your plate and slide it into one of the long side of the plate, because the plate is open, then you can push the other side of the plate into place (it will not work unless the plate is fully open). Next you close the quickset lever one notch which allows you to adjust the position, then another notch to fully lock it.