You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Standard Gain With Detachable 2mm Cable And Ta4f Connector For Anchor Audio Wireless Transmitters (light Beige)

Countryman E6 Directional Earset Mic, Standard Gain With Detachable 2mm Cable And Ta4f Connector For Anchor Audio Wireless Transmitters (light Beige)
  • Product Code: ga79358
  • Availability: In Stock

$1,949.85 $3,061.26

The light beige Countryman E6 Directional Earset Mic, Standard Gain with Detachable 2mm Cable and TA4F Connector for Anchor Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersAnchor Audio: WB-6000, WB-6400, WB-8000
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL125 dB (A-Weighted)
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAnchor Audio: WB-6000, WB-6400, WB-8000
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL125 dB (A-Weighted)
Sensitivity6.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.079" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorLight Beige
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. can they be used with optech's camera straps?

A: Yes, we suggest the following strap for such a application. OP/TECH USA E-Z Comfort Strap (Black) BH #OPSEZCB • MFR #2701252 https://www.bhphotovideo.com/c/product/118815-REG/OP_TECH_USA_2701252_E_Z_Comfort_Strap_Black.html

Q: 2. What is the widest sprap opening for this AL-4, or in other words what strap fits besides 10 mm?

A: The Peak Design AL-4 Anchor Links would accommodate a strap that is 12mm or below.

Q: 3. Will this work for the Sony A73 original strap in that camera?

A: Yes. The following anchor set will work with the Sony a7 III Mirrorless Cameras.

Q: 4. Would these work with a Leica strap that has permanent metal rings on the strap?

A: Yes. The following unit offers eyelets in order to attach via " o" rings.

Q: 5. Is a battery included in Standard kits for Hobolite Mini and/or Micro? (Not listed in "In The Box"

A: The Mini comes with an integrated battery that is built into the light. The Micro Standard Kit comes with one removable battery, while the Micro Creator Kit comes with 3 - one in the light, and 2 in the battery charger.

Q: 6. The bottem of the connector strap opening for wider strap ? Like Nikon Z 800 mm /f6.3 lens will fit ? Thanks

A: The Peak Design AL-4 Anchor Links are compatible with the Nikon LN-3 strap for the Nikon NIKKOR Z 800mm f/6.3 VR S Lens.

Q: 7. Will this work with 3.5mm stereo source to sub rca input?

A: Yes the SVS SoundPath Wireless Audio Adapter includes an 1/8'' to RCA adapter for that compatibility of using a subwoofer as well.

Q: 8. How wide? Can I use 1" webbing or only 3/4"? What is the difference btw V3 and V4? How can I identify the diff on box?

A: Peak Design AL-4 Anchor Links housing has 2 holes. the smallest one is 1.2 x .32 cm, the largest is 32 x .32 cm. Therefore any webbing would fit through them. The V4 has a thick cord and the logo is only in one side compare to the V3 anchors.

Q: 9. Will the Peak AL 4 anchors work with Canon m5?

A: Yes it will

Q: 10. Are the anchors strong enough to carry a Z9 attached to a 400 F2.8 lens?

A: Each anchor can withstand over 200 lbs of force so it will easily support a large camera and lens such as the Nikon Z9 and the 400mm f2.8 lens.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Products You May Like

Dji Focus

$4,797.00 $5,996.25

Freefly Movi Xl To Mitchell Adapter

$1,875.00 $2,587.50

Portabrace Rb-3k Kodiak Run Bag (blue)

$768.66 $976.20

Gabor Laptop Rising Flex Stand

$134.97 $172.76