The light beige Countryman E6 Directional Earset Mic, Standard Gain with Detachable 2mm Cable and LEMO 4-Pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. How much power output is needed to power the cable and motor through a Sony NPF battery adapter? My adapter drops 7.4v power and I wanted to know if it is correct to power the Nucleus M motor.

A: The Nucleus M motor supports Voltage 7.2-24 V

Q: 2. is there a fan in this unit?

A: The light uses a passive cooling system. No fan.

Q: 3. Is it possible to control auto focus points with this remote directional pad?

A: No. The pad is only for navigating the remote.

Q: 4. which cable do i require for Nikon D810?

A: The Vello ShutterBoss II Timer Remote Switch is a cable release that has a built-in cable. As such, you would have to purchase the appropriate model for your needs, as the cables are not interchangeable. The Vello ShutterBoss II Timer Remote Switch for Nikon with 10-Pin Connection, B&H # VERCN12, would be the correct remote release for use with the Nikon D810 DSLR camera. If you instead own the Vello Wireless ShutterBoss Timer Remote (which does use a detachable cable - available separately), then the Vello 2.5mm Remote Shutter Release Cable for Nikon 10-Pin Cameras, B&H # VERCCN125, would be the correct replacement cable that would work for your needs.

Q: 5. Is a battery included in Standard kits for Hobolite Mini and/or Micro? (Not listed in "In The Box"

A: The Mini comes with an integrated battery that is built into the light. The Micro Standard Kit comes with one removable battery, while the Micro Creator Kit comes with 3 - one in the light, and 2 in the battery charger.

Q: 6. Can I power this with usb from one of my 3 ronin rs2 slots ?

A: Yes, the DJI RS2 can output at least 5V through the USB-C ports and the Freakshow HD 4K 12G-SDI MSX2-L Microsplit Reclocking DA with Locking LEMO Power Connector's power consumption is 5 to 36 VDC.

Q: 7. Would this device work with Fujifilm X-E2, X-T1 and X-T2? I appreciate all answers. Thank you.

A: One of the three cables included in the above kit would be compatible for use with the three cameras you list above (the other cables are only compatible for use with Nikon DSLR cameras).

Q: 8. Will this unit work on my canon 1 DX Mark II?

A: Yes, the ShutterBoss II Timer Remote Switch is compatible with the Canon EOS-1D X Mark II DSLR Camera.

Q: 9. Which model for Pentax K3ii and K50?

A: The Pentax K3ii and K50 will work with a different model that has the Canon Sub Mini Connection. For those Pentax cameras you will need B&H #VERCC12 instead.

Q: 10. how many volts?

A: This is a cable it does not have voltage. That would be determined by the battery it is connected to.