The lightweight C7 7" 4K HDMI Monitor from ANDYCINE is an on-camera monitor featuring an ultrabright display for daylight viewing, 3D LUT import, a touchscreen interface, and multiple imaging tools. The C7 features a 2200 cd/m² bright, 1920 x 1080 IPS touchscreen with a 160° viewing angle. This versatile monitor can also power select cameras via its 8.4 VDC barrel output and a separately available dummy battery cable.

7" HDMI 1920 x 1080 Touchscreen    3D LUT Import via SD Card    1200:1 Contrast, 2200 cd/m² Brightness    Built-In, Dual L-Series Battery Plate    Supports up to DCI 4K24/UHD 4K30 Video    8.4 VDC Output Powers Select Cameras    Calibrated for Rec. 709 HD Color    160° Wide Viewing Angle    Multiple Imaging Tools    Power via Optional 12V Adapter

7" touchscreen with tap and swipe controls

Apply film looks by loading 3D LUTs using an SD card

Super-bright 2200 cd/m² for easy daylight viewing

Multiple imaging tools include waveform, vectorscope, histogram, and audio level displays

Built-in light sensor automatically dims the screen brightness according to the ambient light

HDMI input and output with support for up to DCI 4K24 and UHD 4K30 video

Related Questions and Answers

Q: 1. Can 3d LUTs be uploaded?

A: Yes, you can upload 3D LUTS. The monitor has an SD card slot for you LUTS to be uploaded to the monitor.

Q: 2. Can the touch screen be used to focus the a7Siii while on a Ronin RS2 Pro?

A: No, the ANDYCINE C7 will not have any control over the connected camera.

Q: 3. Will this monitor work with the Sony ZV-E10?

A: Yes. Via hdmi input Please review the following needed item https://bhpho.to/37VJk9t

Q: 4. in this monitor I can see shutter speed, iso, aperture, etc. as if it were the replica of the monitor of my canon r? Thank you

A: This will depend on how the camera is set. This will show whatever the camera is able to output to it. If you have screen info on for the camera’s HDMI output it will be shown on this monitor.

Q: 5. Hello can i buy canon lp-6 battery plate? Thanks

A: Unfortunately there is not a replacement battery plate at this time. Alternatively you could use dummy battery solution, such as IndiPRO Tools POWER POD Dual LP-E6 Universal Power System: https://www.bhphotovideo.com/c/product/1148773-REG/indipro_tools_pp2637_power_pod_dual_lp_e6.html

Q: 6. Does this monitor support cross conversion and simultaneous output?

A: It does not. The outputs are both loop-outs.

Q: 7. What is the battery life on this monitor?

A: The battery life will depend on the battery used.

Q: 8. What D-Tap cable do you recommend to run from a V-Mount battery to the monitor?

A: The best choice would be to use a dummy battery ( SONY NPFL) to dtap with the ANDYCINE C7S Two good choices would be https://bhpho.to/35RP2c3 or https://bhpho.to/3JdvZqW

Q: 9. Is there a way to mount this without the arm? Is the arm removable?

A: You can elect not to attach the arm to the ANDYCINE C6 6" HDMI Ultrabright Touchscreen Monitor. You can then mount via either of the two 1/4" threads on the bottom or right side.

Q: 10. it says sdi "loop output" does that mean i can still go HDMI IN and then SDI out?

A: No it does not. This monitor is not able to convert from HDMI to SDI therefore you can not send a HDMI video feed in and send it out through SDI. The loop output is restricted to the type of input that is coming in. for example if HDMI video goes in then you can send it out via the HDMI Loop Output if SDI video goes in then you can send the video out via the SDI Output.